Abstract:Large amounts of single-wall carbon nanotubes(SWNTs) deposited on all the wall of the chamber have been obtained in helium and nitrogen mixed atmosphere using Co-Ni alloy catalyst with a modified arc furnace which can control the temperature during arcing process. Additionally, there are many weblike deposition products located between the cathode and anode. By twostep purification:the as-grown SWNT was heated in air at 500℃ for 30min, then soaked in 37% hydrochloric acid for 72h and filtered with deionized water. Microanalysis was carried out by Transmission electron microscopy(TEM), high-resolution TEM and Raman spectroscopy. The results obtained indicate that the purified SWNTs have high purity (higher than 95%) and uniform diameter (from 1.24 to 1.38nm).This experiment indicates that the temperature strongly affects the production of SWNT; the production and purity of SWNT increase with temperature. When the temperature is 600℃, the purity is about 70% and the production of SWNT is 12g/h.

The Effect of Electric Current on the Synthesis of Single-Walled Carbon Nanotubes by Temperature Controlled Arc Discharge

New Development in the Synthesis of Single-Walled Carbon Nanotubes

Synthesis Of Large Quantity Single-Walled Carbon Nanotubes By Arc Discharge

Catalyst Effect on the Preparation of Single-Walled Carbon Nanotubes by a Modified Arc Discharge

Current and Arc Pushing Force Effects on the Synthesis of Single-Walled Carbon Nanotubes by Arc Discharge.

Effects of Catalyst Composition on the Synthesis of Single-Walled Carbon Nanotubes

Effect of Heat-Pretreatment of the Graphite Rod on the Quality of SWCNTs by Arc Discharge

Purification and characterization of single-walled carbon nanotubes produced by arc-discharge

Pressure Effects on Nanotubes Formation Using the Submerged Arc in Water Method

Large Scale Synthesis of Single-Wall Carbon Nanotubes by Arc-Discharge Method

Mass-production of single-wall carbon nanotubes by arc discharge method

Influence of NH3 Atmosphere on the Growth and Structures of Carbon Nanotubes Synthesized by the Arc-Discharge Method

The Effect of Catalyst Concentration on the Synthesis of Single-Wall Carbon Nanotubes

An Efficient Method to Produce Single-Walled Carbon Nanotubes by Round-Trip Arc Discharge

Low-cost Synthesis of Single-Walled Carbon Nanotubes by Low-Pressure Air Arc Discharge

Catalyst composition and content effects on the synthesis of single-walled carbon nanotubes by arc discharge

Improving the Synthesis of Single-Walled Carbon Nanotubes by Pulsed Arc Discharge in Air by Preheating the Catalysts

Effect of metal oxide and oxygen on the growth of single-walled carbon nanotubes by electric arc discharge

Synthesis of single-walled carbon nanotubes with selective diameter distributions using DC arc discharge under CO mixed atmosphere

Large Scale and High Purity Synthesis of Single-Walled Carbon Nanotubes by Arc Discharge at Controlled Temperatures

Optimization of Carbon Nanotube Production by Arc-Discharge