Abstract:Lanthanum borate-based glass-ceramic has recently received considerable attention in the field of high-frequency communications as a sintering aid, due to the low sintering temperature and the precipitation of crystalline phases with excellent dielectric and mechanical properties. Importantly, the densification and crystallization behaviors of glass-ceramic are not only determined by its composition, but also affected by various processing parameters, such as the initial particle size, which is rarely explored for optimizing the dielectric and mechanical properties of lanthanum borate-based glass-ceramic/ceramic composites. Herein, La2O3–B2O3–CaO–P2O5–SiO2 (LBCPS) glass-ceramics with a series of initial particle sizes are achieved by ball milling method through controlling the milling time. Employing LBCPS glass-ceramics with different particle sizes as the sintering aid, various LBCPS/Al2O3 composites are fabricated, and the dielectric and mechanical properties of which are further investigated. Notably, the LBCPS/Al2O3 composite with a moderate glass-ceramic particle size of 2.7 μm exhibits the excellent comprehensive performance with a low dielectric loss of 8.6 × 10−4 at 9.8 GHz and a high flexural strength of 199 MPa. Moreover, the influencing mechanisms of the glass-ceramic particle size on the crystallization, microstructure, and densification of the LBCPS/Al2O3 composite have also been systematically explored and proposed. This research work provides an intriguing strategy for optimizing the dielectric and mechanical properties of the glass-ceramic/ceramic as the high-performance low-temperature co-fired ceramic (LTCC) substrate.

A simple and an effective method for the fabrication of densified glass-ceramics of low temperature co-fired ceramics

The Influence of Alumina to Microstructure and Dielectric Properties for Low Temperature Co-Fired Ceramics

The study on fabrication of dielectric materials for low temperature Co-fired ceramics

Fabrication of Ba-Ti-B-Si-O Glass-Ceramics for LTCC

Low-dielectric-constant LiAlO2 Ceramics Combined with LBSCA Glass for LTCC Applications

Preparation of low-permittivity K2O–B2O3–SiO2–Al2O3 composites without the addition of glass

Low Loss and Good Chemical Compatibility with Silver Electrodes of Cu2+-substituted Ba3Ti4Nb4O21 Ceramics Realizing Low Temperature Co-Fired Ceramics Technology: Crystal Structure, Vibration Modes and Chemical Bonds Studies

Microwave dielectric characterization and densification mechanism analysis of CaO‐B2O3‐SiO2 glass‐ceramic/Al2O3 composites for LTCC applications

Low Temperature Sintering of BaO–ZnO–TiO2 Ceramics for LTCC Applications

Effects of Li2O-B2O3-SiO2 glass on the low-temperature sintering of Zn0.15Nb0.3Ti0.55O2 ceramics

Low Temperature Sintering and Microwave Dielectric Properties of Ba4nd9.33ti18o54 Ceramics Doped with Crystallizable Glass

Low-temperature sintering kinetics and dielectric properties of Ba5Nb4O15 with B2O3–SiO2 glass

Particle size modulation for effectively optimizing the dielectric and mechanical properties of La2O3–B2O3 based glass-ceramic/ceramic LTCC substrates

Densification and Characterization of Sio2-B2o3-Cao-Mgo Glass/Al2o3 Composites for Ltcc Application

Fabrication and Properties of Li 2 O–Al 2 O 3 –sio 2 Glass/al 2 O 3 Composites for Low Temperature Co-Fired Ceramic Applications

CaF2–AlF3–SiO2 Glass-Ceramic with Low Dielectric Constant for LTCC Application

Microstructure and Properties of ZnO Doped Li2O–Al2O3–SiO2 Glass–ceramic for LTCC Applications

Synthesis, microstructure and characterization of Ultra-low permittivity and dielectric loss ZnO-B2O3-SiO2 glass/SiO2 composites for LTCC application

Oxyfluoride Glass-Ceramic Composites for Low Temperature Co-Fired Ceramic Substrate

Low Temperature Sintering Kinetics and Microwave Dielectric Properties of BaTi5O11 Ceramic

Tailoring sintering kinetics and dielectric properties of Li2SiO3 ceramics by CaO–B2O3–SiO2 glass dopant for LTCC substrate applications