Abstract:Construction process should be considered in structural analysis because the self-weight only affects the finished part of the structure and does not act on the unfinished part. However tall buildings are generally designed on the basis of the whole structure under total loads so that the internal forces are different from the real value. In this paper, the formula for estimating the relative deviation of internal forces obtained by the normal design and by considering construction process is provided applying the principle of structural mechanics. Some factors such as floors、spans、sites、loads and the stiffness ratio of column to beam having influence upon structural performance are discussed. Through calculating reinforced concrete frames, the bending moments obtained by considering construction process are compared to that of design model. Then the relationship between the relative moment deviation and the stiffness ratio of column to beam is drawn. It is suggested that calculated model should accord with the construction process in the design of tall buildings. Lastly, the simple method is put forward to modify the internal forces of design model.

Force and Form of the Column in Architecture

On Structural Forms of Modern Buildings

The Strong Column–weak Beam Design Philosophy in Reinforced Concrete Frame Structures: A Literature Review

A STUDY ON DESIGN METHOD OF ENCASED STEEL COLUMN BASES

Study on Internal Force Analysis of Special-Shaped Column Structures

Structure Force System and Form Combination of Long-Span Structure Building to Lightening Design

A unified approach for multiple lateral bracing of columns

Design Forces of Horizontal Inter-Column Braces

Integrating Form and Force An Introduction to Three Works by Kerez and Schwartz and Their Graphic Static Analysis

The stiffness and strength requirements for platform-beams in an industrial hall

Numerical Investigation and Design of Thin-Walled Complex Section Steel Columns

STRENGTHENING DESIGN OF AN OFFICE BUILDING WITH REMOVED COLUMNS

Study on Stability Design Method for an Instrumental Steel Column with Openings Used in the Construction of Super High Rise Structures Under Axial Compression

Force behavior research on new Dry-Alveolus-Connection of precast reinforced concrete frame column

"Form Finding" in Non-linear Architectural Design

The Design Experience of Large Span Steel Structural Gallery

Force analysis and calculation method of composite columns with core high-strength concrete filled steel tube under axial compression

Form Constitute of Architectural Facade Based on Conduction Transformation

Analysis of the Internal Force in Tall Building Considerd by Construction Process

Study on Relation Between Architectural Form and Structure

Study on influence of column axial force on the dissipative buildings