Abstract:In view of the decreasing trend of column widths in steel residential buildings, a new type of concrete filled rectangular steel tubular column-H-section steel beam connections with external stiffeners is proposed. The diaphragm is removed in this connection. Pseudo-static tests of seven new joint specimens were carried out. The test parameters were the section of the steel beam and the thickness and the height of the long side of the external stiffeners. The failure modes, hysteretic curves, skeleton curves, strength, stiffness degradation, strength degradation, ductility and energy dissipation capacity of the joints were studied. The test results show that there were three failure modes of this new joint, namely, tensile failure of beam flange, weld failure between beam flange and external stiffener, and column wall failure near the external stiffener. The ductility coefficient was 2.17 to 3.67, the equivalent viscous damping coefficient was 0.2 to 0.3, and the average drift ratio was 1/49. The seismic performance of the joint met the requirements of strong joints and weak members. Increasing the thickness or the height of the long side of the external stiffeners can increase the strengths of the joints. The premature cracking of the beam flange, the welding seam between beam flange and external stiffener, or the column wall will reduce the ductility and energy dissipation capacity of the joints. It is proposed that the connection coefficient should be 1.4 when checking the ultimate strength of the column wall and joint weld. The strengthening or weakening measures on the flange at the beam ends can be taken to ensure that the new joints have a sufficient plastic deformation capacity.

STRENGTHENING DESIGN OF AN OFFICE BUILDING WITH REMOVED COLUMNS

The Strong Column–weak Beam Design Philosophy in Reinforced Concrete Frame Structures: A Literature Review

Tensile Behavior of Novel Column-to-column Connection for Modular Steel Construction Using High-Strength Bolts

JOINTS OF MULTI-STORY SPANNED DIAGONAL BRACING SYSTEM IN TALL STEEL BUILDINGS: ANALYSIS AND DESIGN METHOD

EXPERIMENTAL STUDY ON THE SEISMIC BEHAVIOR OF CFST RECTANGULAR COLUMN TO H-SECTION STEEL BEAM CONNECTIONS WITH EXTERNAL STIFFENERS

Experimental study and numerical simulation of seismic performance of stiffened thin steel plate shear walls considering the effect of vertical load on frame column

Seismic Behaviors of High-Strength Bolted End-Plate Connected Composite Steel Beam and Square Concrete Filled Steel Tube Column Frames

SEISMIC DESIGN OF BUILDING A OF MINDA PLAZA

Seismic Behavior of Pc Column and Steel Beam Composite Moment Frame with Posttensioned Connection

Experimental study on seismic behavior of assembled steel beam-PC column composite frames

Structure Strenghtening Design with Adding Storey of Beijing International Financial Center

Rehabilitation and Strengthening Design of a Great Courtroom and Office Building

Behavior and Design of Slender Concrete-Filled Wide Rectangular Steel Tubular Columns under Axial Compression

Steel Columns Strengthened/reinforced by Prestressed CFRP Strips: Concepts and Behaviors under Axial Compressive Loads

LOCAL BUCKLING OF THIN-WALLED HIGH STRENGTH STEEL COLUMNS WITH WEB STIFFENERS

APPLICATION OF PRESTRESSED STEEL STRIPS RETROFITTED METHOD IN REFORMING AN OFFICE BUILDING

The Design and Constructional Disposal on the Column Base Joint of Lightweight Steel Adding Story on the Top of Multistoried Building

Axial compressive performance of RC columns strengthened with prestressed CFRP fabric combined with UHPC jacket

THE STOREY-ADDING AND REINFORCEMENT DESIGN AND CONSTRUCTION FOR A BUILDING

Analysis and Design of Concrete-Filled Stiffened Thin-Walled Steel Tubular Columns under Axial Compression

Finite element analysis of concrete‐encased columns reinforced with multiple steel sections