Abstract:Against the update of load design standards and requirement of long-term service, many latticed towers using steel angles subjected to gradual performance degradation must be retrofitted for bearing further social functions, e.g., electric power transmission and fifth-generation mobile communication. Therefore, this paper proposed a non-destructive reinforcement method for steel angles by avoiding unnecessary new construction or complex reinforcement procedure. The non-destructive reinforcement of a steel angle is composed of a steel angle, reinforcement plate, and fixture. Standardized fixtures are used to connect the reinforcement plate and steel angle to achieve steel angle reinforcement. In retrofitting tests, built-up steel angle members were loaded under axial compression, in which the failure mode and reinforcement effect of key parameters (e.g., clamp type, slenderness ratio, and clamp distance) were analyzed and compared, where a significant reinforcement effect was obtained with the capacity increment within 39~174%; the clamp types and clamp distance had a slight effect on bearing capacity; and the proposed reinforcement method was more effective for slender members. Based on the mechanical mechanism analysis and failure mode, the accuracy of the design method for calculating the bearing capacity of those built-up steel angle members was suggested and verified, in which a simplified mechanical model for the flexural-buckling mode was developed. The design method based on AISC360-16 agreed well with the test result and could be effectively used for calculating the flexural–torsional bearing capacity of those built-up steel angles. This study can provide a valuable reference for the design and application of non-destructive reinforcement of angle steel towers.

APPLICATION OF PRESTRESSED STEEL STRIPS RETROFITTED METHOD IN REFORMING AN OFFICE BUILDING

APPLICATION OF PRESTRESSED STEEL STRIPS RETROFITTED METHODS IN REINFORCEMENT OF AN INDUSTRIAL PLANT

APPLICATION OF PRESTRESSED STEEL STRIPS RETROFITTED METHODS IN AN ADDING STORY BUILDING FOR A SUPERMARKET

Cfrp Strip Cable Retrofit of Rc Frame for Collapse Resistance

Research on the Renovation of Historical Buildings and Improvement of the Residential Environment of Hangzhou Zhuyangxin Plaster Store

Experimental Study on Seismic Retrofit and Repair of Circular Reinforcement Concrete Short Columns by Fiber Reinforced Plastic

Analysis of the Existing Reinforced Concrete Rigid Frame Arch Bridge Strengthened with Arch and Cable System

APPLICATION OF STEEL-CONCRETE COMPOSITE BEAM IN STOREY-ADDING REHABILITATION AND STRENGTHENING OF A BUILDING

The Strengthening Of Zini Bridge With External Prestressing Tendons

Condition assessment and renovation of an aged precast reinforced concrete multi-storey building

Rehabilitation and Strengthening Design of a Great Courtroom and Office Building

Reinforcement Analysis of an Old Multi-Beam Box Girder Based on a New Embedded Steel Plate (ESP) Strengthening Method

Application of reinforcing a building by change its structure system

Experimental Study and Bearing Capacity Analysis of Retrofitted Built-Up Steel Angle Members under Axial Compression

Design About the Reinforced Concrete Structure

Strengthening an In-Service Reinforcement Concrete Bridge with Prestressed Cfrp Bar

Experimental study of reinforced concrete shear wall structure with low reinforcement ratio retrofitted by exterior strengthening method

EXPERIMENTAL STUDY ON CONCRETE BEAMS STRENGTHENED BY CARBON FIBER CABLES WITH EXTERNAL PRESTRESS

Evaluation and Repair of Construction Damage to an Old Factory Building

Experimental and Numerical Study of Outside Strengthening with Precast Bolt-Connected Steel Plate–Reinforced Concrete Frame-Brace

Evaluating the Performance of Skewed Prestressed Concrete Bridge after Strengthening