Experimental study of reinforced concrete shear wall structure with low reinforcement ratio retrofitted by exterior strengthening method

Yukun Su,Wenfeng Li,Qisong Miao,Peng Pan

DOI: https://doi.org/10.19701/j.jzjg.2017.18.018

2017-01-01

建筑结构

Abstract:A group of low reinforcement ratio concrete shear wall buildings which were constructed during 1970s are still used of Beijing.As the buildings were built pretty early,according to the economic conditions and standards,their concrete strength is too low,and the steel reinforcement in the concrete wall is inadequate.In order to satisfy current seismic design standard for reinforced concrete structures,the buildings need to be retrofitted.To shorten the construct period and minimize the disturbance to the residents,a retrofit method that is constructed from outside were proposed.This method only need to extend the length of the transverse wall,add the vertical wall and use concrete beam across the roof to connect the reinforcement part of both sides without enter the original structure.In order to study the seismic performance of the retrofitted structures,a structure model with a scale ratio of 1:2 was tested by using substructure method.The test results show that the strength of the structure significantly increases after retrofitted.The strength of the structure reaches the peak value when the top displacement reaches 1/200 of the structure height.When the top displacement reaches 1/100 of the structure height,the major damage of the structure is observed at the coupling beams and the bottom of the shear wall.The residual strength is about 85％ of the peak value.Strength and ductility of the retrofitted structure satisfy the current seismic design standard.