Abstract:Plasma-facing components (PFCs) were simulated by ANSYS, and the influence of gradient layer number and composition distribution index on the distribution of temperature field and stress field was analyzed. The simulation results show that a gradient structure with four gradient layers and a component distribution index of 1 makes the PFC assembly have lower overall temperature and lower thermal stress. Tungsten–copper functionally graded materials (W–Cu FGMs) (W-20 vol% Cu/W-40 vol% Cu/W-60 vol% Cu/W-80 vol% Cu) were fabricated by a selective laser melting (SLM) process based on finite element simulation results. The effects of microstructure on the hardness, internal stresses, thermal conductivity, and thermal expansion coefficient of the W–Cu FGMs were evaluated. The results show that hardness increases from 196 to 1173 HV0.3 with increasing W content. The internal stresses of W-20 vol% Cu, W-40 vol% Cu, W-60 vol% Cu, and W-80 vol% Cu are about 191.7 MPa, 627 MPa, 1049.5 MPa, and 561.9 MPa, respectively. The thermal conductivity of the W–Cu FGM is 23 W/m·K and the thermal diffusion coefficient is 10 mm2/s at 25 °C, and the thermal conductivity rises to 70 W/m·K and the thermal diffusion coefficient rises to 18.5 mm2/s at 800 °C. After 100 thermal shock cycles, the internal defects increased, but the interface between the gradient layers remained well bonded.

PREPARATION FOR Mo/Cu CONTINUOUS FGM

Enhanced shear strength of Cu/AlN/Cu gradient materials with continuous and quasi‐continuous interfacial structures

Current Status of W-Cu Functionally Gradient Materials

Preparation of Cu/SiC FGM by Coating Method and SPS Sintering

Fabrication and microstructure of W/Cu functionally graded material

Fabrication Of Sic/Cu Functionally Gradient Material By Graded Sintering

Integrated preparation and enhanced performance of high-melting-point ZrC–Mo multilayer graded materials

Fabrication and Application of W/Cu Functionally Graded Material

Simulation and Study of Manufacturing of W–Cu Functionally Graded Materials by a Selective Laser Melting Process

Fabrication and characterization of high dense Mo/Cu composites for electronic packaging applications

Fabrication of W–Cu Functionally Graded Material with Improved Mechanical Strength

Fast fabrication of W-Cu functionally graded material by high-gravity combustion synthesis and melt-infiltration

Microstructure and thermal and electric conductivities of high dense Mo/Cu composites

A New Approach for the Preparation of Functionally Graded Materials Via Slip Casting in a Gradient Magnetic Field

Microstructure evolution, diffusion behavior, and mechanical properties of a Cu/AlCoCrFeNi 2.1 composite under pulsed magnetic field

Atomic-scale investigation on diffusion mechanism of immiscible Mo/Cu system under different temperatures and electric field

Microstructure and Mechanical Properties of High Densification Mo/Cu Composites

Preparation of Gradient Materials with Molten Salts Electrodeposition

Fabrication and thermal expansion properties of high dense Mo/Cu composites

Cu/Mo/NGs composites: Multilayer interconnected spatial net structure enhanced the mechanical properties

Structure and Property of W-Ni-Cu Functionally Graded Materials by Composite Electrodeposition