Abstract:Although Ni-rich cathode materials have made a great success in the field of electric vehicles due to their high capacity and low cost, many efforts are still focused on further increasing their capacity through increasing the Ni content. However, the increased Ni content usually leads to a more serious surface structure reconstruction and hence higher resistance during electrochemical cycling, which has become a major issue for Ni-rich cathodes. In order to explore a balance between surface structure stability and high energy density, a model Ni-rich material with transition metal ion gradient is prepared using a mechanical fusion and co-lithiation method, which is easy for large-scale fabrication. The gradient structure sample contains an inter bulk of LiNi0.90Co0.05Mn0.05O2 and a thin gradient outer layer with lower nickel content. The gradient sample shows a superior cycling property, rate retention, and improved safety performance. Systematic study suggests that the possible reasons for the improved electrochemical and mechanical performance of the gradient nickel-rich materials are the high stability of lower-Ni surface and the decreased surface tensile stress. This work provides an easy up-scaled method to build a gradient structure and a further in-depth understanding on its structure stabilization mechanisms, which are essential for developing high energy-density lithium-ion batteries.

Preparation of Gradient Materials with Molten Salts Electrodeposition

Current Status of W-Cu Functionally Gradient Materials

Structure and Property of W-Ni-Cu Functionally Graded Materials by Composite Electrodeposition

Preparation of V-Fe Gradient Materials on CarbonSteelby Electrodepositionin a NaCl-KCl-NaF-V2O3 Molten Salt

Preparation of Functionally Graded Cu/AlN/Cu Electrode Materials for Thermoelectric Devices

Simulation and Study of Manufacturing of W–Cu Functionally Graded Materials by a Selective Laser Melting Process

A Novel Strategy for Designing Fe-Ni Gradient Multilayer Coatings Using Laser-Assisted Electrodeposition and Regulation Mechanism

Preparation of gradient nickel coating on copper by electrodeposition and study on its hydrogen evolution property

Fast fabrication of W-Cu functionally graded material by high-gravity combustion synthesis and melt-infiltration

Fabrication and microstructure of W/Cu functionally graded material

Fabrication of W–Cu Functionally Graded Material with Improved Mechanical Strength

Fabrication and Application of W/Cu Functionally Graded Material

Influence of Preparation Parameter on Microstructure of Cu/Si Gradient Layer Section on Copper Surface

Fabricating a thin gradient surface layer to enhance the cycle stability of Ni-rich cathode materials

Preparation of layered gradient Cu–Cr–Ti alloy with excellent mechanical properties, thermal stability, and electrical conductivity

Study on the preparation of the SiCp/Al–20Si–3Cu functionally graded material using spray deposition

Preparation of a Functionally Gradient Aluminum Alloy Metal Matrix Composite Using the Technique of Spray Deposition

In-situ Functionally Gradient Materials Produced by Electromagnetic Separation Method

Fabrication Of Sic/Cu Functionally Gradient Material By Graded Sintering

The Integrated Preparation of Porous Tungsten Gradient Materials with a Wide Porosity Range

Study on Diffusion Kinetics of Chromium and Nickel Electrochemical Co-Deposition in a NaCl–KCl–NaF–Cr2O3–NiO Molten Salt