Abstract:Micro-powered wireless embedded devices are widely used in many application domains. Their efficiency in practice, however, is significantly constrained by the dual limitations of low harvesting rates and tiny energy buffer. Recent research presents a network stack that efficiently fragments a large packet into many smaller packets that can fit within the available energy in the energy buffer of limited size. While this fragmentation technique represents a major step forward in solving the minuscule energy budget problem, it also introduces a tremendous practical challenge where potentially many fragmented packets belonging to different devices may contend for the communication channel. Designing purely heuristic-based packet transmission protocol is undesirable because the resulting per-packet and end-to-end transmission delay are unknown, thus causing unpredictable system performance which is unacceptable for many applications with real-time constraints. In this paper, we first formulate this packet transmission scheduling problem considering physical properties of the charging and transmission processes. We then develop a novel packet prioritization and transmission protocol NERF that yields tight and predictable delay bounds for transmitting packets from multiple micropowered devices to a charger. We have implemented our protoco on top of the WISP 4.1 platform and the SPEEDWAY RFID READER, and conducted validation experiments. Our experiments validate the correctness of our implementation and show that NERF can reduce the total collection delay by 40% when compared to an existing protocol ALOHA. We have also performed extensive data trace-driven simulations. Simulation results demonstrate the effectiveness of our proposed protocol. On average, our protocol yields an over 30%improvement in terms of runtime transmission delay compared to existing methods, while being able to guarantee tight and provable response time bounds.

Frequency Driven Repeater Insertion for Deep Submicron

A Novel Dieletric Slot Stripline Structure for Millimeter Wave Flexible Printed Circuit

Minimal-Power, Delay-Balanced Smart Repeaters for Global Interconnects in the Nanometer Regime

Low Power Repeaters Driving Rlc Interconnects with Delay and Bandwidth Constraints

A Compact 2-18Ghz Ultra-Wideband Frequency-conversion T/R Module Based on a 3D Heterogeneous Integrated Process

Interconnect Delay Optimization Using a Novel Hybrid Insertion Strategy

An RF/baseband FDMA-interconnect Transceiver for Reconfigurable Multiple Access Chip-to-chip Communication

Enabling Predictable Wireless Data Collection in Severe Energy Harvesting Environments

Power Optimization with Interconnect Repeater Heat Transferance Effect

Analytical Analysis of Power-Constrained Repeaters' Insertion in Large-Scale CMOS Chips

A 5.1gb/s 60.3fj/bit/mm PVT Tolerant NoC Transceiver

Redundant Vias Insertion for Performance Enhancement in 3D ICs.

Optimising bandwidth over deep sub-micron interconnect

A 15gb/s Wireline Repeater in 65nm CMOS Technology

Parallelized Computational Technique for Signal Propagation Analysis at Very High Speed Differential Transmission Lines

On-Chip Impedance-Optimized Microstrip Transmission Line For Multi-Band And Ultra-Wide-Band Microwave Applications

Quantitative Studies of Impact of 3D IC Design on Repeater Usage

SIGNAL PROPAGATION IN HIGH SPEED DIFFERENTIAL TRANSMISSION LINE USING PARALLELIZED FINITE-DIFFERENCE TIME-DOMAIN METHOD

Optimal repeater insertion for nano‐interconnects in current‐mode signalling scheme

A Low-Latency and Low-Power Hybrid Insertion Methodology for Global Interconnects in VDSM Designs

Delay-Balanced Smart Repeaters for On-Chip Global Signaling