Abstract:Thiophene (C 4 H 4 S) removal from coke oven gas is critical to its subsequent high valuable utilization but remains a challenge. MOF-199 was considered as a promising candidate for C 4 H 4 S adsorption removal owing to its nature of enriched opened Cu sites. However, the presence of mixed valence of Cu(II) and Cu(I) in MOF-199 makes it puzzling to their respective contribution to the removal of C 4 H 4 S. Herein, a series of MOF-199 with different Cu(I) contents were synthesized using different methods, including hydrothermal, solution diffusion, and ultrasonic, and their C 4 H 4 S adsorption performance were investigated. The respective contributions of Cu(II) and Cu(I) to the C 4 H 4 S removal was systematically discussed. The collected results indicated that although the samples prepared with different methods present a remarkable difference in textural characters, the latter was found to have a negligible influence on the C 4 H 4 S removal owing to MOF-199(H) affording an inferior surface area and pore volumes but performing the best C 4 H 4 S removal capacity of 53.7 mg S/g. The co-adsorption results of CH 3 SCH 3 and C 4 H 4 S indicated that the excellent performance of MOF-199(H) mainly attributed to the presence of Cu(I), which provides active sites for C 4 H 4 S adsorption through π complex coordination. Cu(II) species was also found to the C 4 H 4 S adsorption via soft-acid-base coordinated interaction, but its contribution is 8.3 mg S/g, only accounting for 15.5 %. Additionally, the adsorption of C 4 H 4 S on MOF-199(H) was found to follow the intra-particle diffusion model and the Langmuir models. Moreover, MOF-199(H) also exhibited an excellent regeneration performance due to the weak interaction between C 4 H 4 S and their opened Cu sites, the C 4 H 4 S adsorption capacity still reaches 50.6 mg S/g after three regeneration cycles, about 94 % of its initial value. The results collected in this study will provide new insights for the manipulation of performance of C 4 H 4 S adsorption on the MOF-199.

Desulfurization of Thiophene from Coke- Oven- Benzene by Selective Adsorption on Zeolite Sieve Sorbent

Removal of thiophene from coke - Oven benzene by selective adsorption on zeolites

Facile fabrication of a superior Cu(I)-NH4Y zeolite adsorbent for improving thiophene adsorption selectivity in the presence of aromatics or olefins

Adsorption Mechanism and Regeneration Performance of Calcined Zeolites for Hydrogen Sulfide and Its Application

Synthesis and Adsorption Desulfurization Performance of Modified Mesoporous Silica Materials M-MCM-41 (M = Fe, Co, Zn)

Cracking of Thiophene in Coke-oven Benzene over the HZSM-5 Zeolite Sieve

Adsorptive Removal of Aromatic Organosulfur Compounds over the Modified Na-Y Zeolites

Molecular mechanism of competitive adsorption desulfurization of fuel oil involving small sulfur-containing molecules and thiophene

Catalytic and deactivated behavior of SAPO-34/ZSM-5 composite molecular sieve synthesized by in-situ two-step method

Revealing the contribution of Cu(II) and Cu(I) inherent in MOF-199 for efficient thiophene removal at room temperature

Removal of thiophene from coking benzene over HZSM-5 zeolite

Direct Oxidation Of Benzene To Phenol By N2o Over Meso-Fe-Zsm-5 Catalysts Obtained Via Alkaline Post-Treatment

Facile and controllable preparation of nanocrystalline ZSM-5 and Ag/ZSM-5 zeolite with enhanced performance of adsorptive desulfurization from fuel

Experimental, isotherm, kinetic and thermodynamic studies of the novel modified zeolite ZSM-5 adsorbent for use in clean fuel processing

XPS Study on Adsorptive Desulfurization of Thiophene over Rapidly Quenched Skeletal Ni

The Adsorption and Catalytic Cracking of C8 Hydrocarbons on HZSM-5 Zeolite

Preparation of desulfurization adsorbent containing ZnO and study on its desulfurization performance

Performance of adsorptive desulfurization for FCC gasoline over modified Y zeolites

Adsorption of thiophene over the transition metal-decorated C 2 N monolayer: A DFT approach

Cobalt-based metal–organic framework for desulfurization of thiophene as a model fuel

Investigation of Cu(I)-Y Zeolites with Different Cu/Al Ratios Towards the Ultra-Deep Adsorption Desulfurization: Discrimination and Role of the Specific Adsorption Active Sites