Abstract:The conjugation of high adsorption and excellent catalytic characteristics is desirable for the removal of volatile-organic-compounds (VOCs) at low-temperatures. In this study, ZSM-5 zeolites with varying Si/Al ratios (15, 30, 100, and 200) were synthesized using the hydrothermal-method to assess their adsorption capability for VOCs. Among them, the ZSM-5(30) sample exhibited a well-defined zeolite structure, exceptional hydrophobicity, a high surface area (S BET ), and micropores, resulting in a higher toluene adsorption capacity of 135 mg/g compared to other adsorbents. Additionally, the ZSM-5(30) sample demonstrated excellent regenerative stability in both dry and humid environments. Consequently, ZSM-5(30), identified as the most effective adsorbent, was subjected to loading with various amounts of Fe metal for the catalytic-oxidation of toluene at low-temperatures. Due to its abundant oxygen-vacancies, adequate acid-sites, and various active oxygen-species, the Fe 0.2 /ZSM-5(30) catalyst (Fe/(Si + Al) = 0.2) not only exhibited a high adsorption capacity for toluene with good stability over five successive cycles but also demonstrated excellent performance in the catalytic oxidation of toluene. The complete conversion of toluene was attained at temperatures approximately 200 °C, with a gas hourly space velocity (GHSV) of 20,000 mL/(g∙h), and maintained stability for 40 h. Furthermore, in-situ diffuse-reflectance infrared-Fourier-transform-spectroscopy (DRIFTS) and gas chromatography-mass spectrometry (GC–MS) results, along with the Mars-Van-Krevelen model, were utilized to elucidate the adsorption and oxidation mechanism of toluene. The unique adsorption and oxidation capabilities of Fe 0.2 /ZSM-5(30) for toluene indicate its promising potential for the removal of VOCs in real industrial-environments. This study provides valuable insights for the design of high-performance bifunctional materials for the adsorption and catalytic-oxidation of VOCs.

Direct Oxidation Of Benzene To Phenol By N2o Over Meso-Fe-Zsm-5 Catalysts Obtained Via Alkaline Post-Treatment

Oxidation of benzene to phenol with N2O over a hierarchical Fe/ZSM-5 catalyst

Possible active sites in Fe/ZSM-5 zeolite for the direct benzene hydroxylation to phenol: 1. μ-Oxo[Fe, M] species (M = Fe, Al)

Selective solvent-free oxidation of toluene to benzaldehyde over zeolite supported iron

The preparation of Fe3+ ion-exchanged mesopore containing ZSM-5 molecular sieves and its high catalytic activity in the hydroxylation of phenol

Generalized and High Temperature Synthesis of a Series of Crystalline Mesoporous Metal Oxides Based Nanocomposites with Enhanced Catalytic Activities for Benzene Combustion

Selective Oxidation of Benzene to Phenol by FeCl3/mpg-C3N4 Hybrids

Integration of Nano-Sized HZSM-5 with ZnZrO x as a Bifunctional Catalyst to Boost Benzene Alkylation with Carbon Dioxide and Hydrogen

Direct Hydroxylation of Benzene with Hydrogen Peroxide Using Fe Complexes Encapsulated into Mesoporous Y-Type Zeolite

Mofs-derived CuCeOx Supported on H-zeolite Socony Mobile-5 for Catalytic Oxidation of 1,2-Dichlorobenzene

The Direct Hydroxylation of Benzene to Phenol Catalyzed by Fe-ZSM-5 Zeolite: A DFT and Hybrid MP2:DFT Calculation

Fabrication and catalytic performance of meso-ZSM-5 zeolite encapsulated ferric oxide nanoparticles for phenol hydroxylation

In situ preparation of highly active and selective Fe‐MOF/V‐C3N4 for photocatalytic hydroxylation of benzene to phenol

Pd/Transition Metal Oxides Functionalized Zsm-5 Single Crystals with B-Axis Aligned Mesopores: Efficient and Long-Lived Catalysts for Benzene Combustion

MXene assisted solvent-free synthesis of a hybrid Fe/TiO2/ZSM-5 catalyst for phenol degradation

High Catalytic Activity and Selectivity for Hydroxylation of Benzene to Phenol over Multi-Walled Carbon Nanotubes Supported Fe3O4 Catalyst

Recyclable Fenton-like Catalyst Based on Zeolite Y Supported Ultrafine,highly-Dispersed Fe 2 O 3 Nanoparticles for Removal of Organics under Mild Conditions

Efficient conversion of benzene and syngas to toluene and xylene over ZnO-ZrO2&H-ZSM-5 bifunctional catalysts

Modification of Fe on hydrophobic ZSM-5 zeolite: Optimization of adsorption and catalytic performance for decomposition of VOCs at low-temperature

Synthesis of Hierarchical MeAPO-5 Molecular Sieve and Optimization of its Catalytic Oxidation of Benzene to Phenol Based on Response Surface Method

Bimetallic Fe-Mn loaded H-ZSM-5 zeolites for excellent VOCs catalytic oxidation at low-temperatures: Synergistic effects and catalytic mechanisms