Abstract:Thiophene (C 4 H 4 S) removal from coke oven gas is critical to its subsequent high valuable utilization but remains a challenge. MOF-199 was considered as a promising candidate for C 4 H 4 S adsorption removal owing to its nature of enriched opened Cu sites. However, the presence of mixed valence of Cu(II) and Cu(I) in MOF-199 makes it puzzling to their respective contribution to the removal of C 4 H 4 S. Herein, a series of MOF-199 with different Cu(I) contents were synthesized using different methods, including hydrothermal, solution diffusion, and ultrasonic, and their C 4 H 4 S adsorption performance were investigated. The respective contributions of Cu(II) and Cu(I) to the C 4 H 4 S removal was systematically discussed. The collected results indicated that although the samples prepared with different methods present a remarkable difference in textural characters, the latter was found to have a negligible influence on the C 4 H 4 S removal owing to MOF-199(H) affording an inferior surface area and pore volumes but performing the best C 4 H 4 S removal capacity of 53.7 mg S/g. The co-adsorption results of CH 3 SCH 3 and C 4 H 4 S indicated that the excellent performance of MOF-199(H) mainly attributed to the presence of Cu(I), which provides active sites for C 4 H 4 S adsorption through π complex coordination. Cu(II) species was also found to the C 4 H 4 S adsorption via soft-acid-base coordinated interaction, but its contribution is 8.3 mg S/g, only accounting for 15.5 %. Additionally, the adsorption of C 4 H 4 S on MOF-199(H) was found to follow the intra-particle diffusion model and the Langmuir models. Moreover, MOF-199(H) also exhibited an excellent regeneration performance due to the weak interaction between C 4 H 4 S and their opened Cu sites, the C 4 H 4 S adsorption capacity still reaches 50.6 mg S/g after three regeneration cycles, about 94 % of its initial value. The results collected in this study will provide new insights for the manipulation of performance of C 4 H 4 S adsorption on the MOF-199.

Removal of thiophene from coke - Oven benzene by selective adsorption on zeolites

Desulfurization of Thiophene from Coke- Oven- Benzene by Selective Adsorption on Zeolite Sieve Sorbent

Removal of thiophene from coking benzene over HZSM-5 zeolite

Cracking of Thiophene in Coke-oven Benzene over the HZSM-5 Zeolite Sieve

Continuous Synthesis of Mesoporous Y Zeolites from Normal Inorganic Aluminosilicates and Their High Adsorption Capacity for Dibenzothiophene (DBT) and 4,6-Dimethyldibenzothiophene (4,6-DMDBT)

Direct Oxidation Of Benzene To Phenol By N2o Over Meso-Fe-Zsm-5 Catalysts Obtained Via Alkaline Post-Treatment

Facile fabrication of a superior Cu(I)-NH4Y zeolite adsorbent for improving thiophene adsorption selectivity in the presence of aromatics or olefins

Molecular mechanism of competitive adsorption desulfurization of fuel oil involving small sulfur-containing molecules and thiophene

Selective solvent-free oxidation of toluene to benzaldehyde over zeolite supported iron

The Adsorption and Catalytic Cracking of C8 Hydrocarbons on HZSM-5 Zeolite

Research on the Removal Effect of Thiophene from Gasoline by Ce-modified Molecular Sieve

Catalytic and deactivated behavior of SAPO-34/ZSM-5 composite molecular sieve synthesized by in-situ two-step method

Revealing the contribution of Cu(II) and Cu(I) inherent in MOF-199 for efficient thiophene removal at room temperature

Removal of Trace Benzene from Cyclohexane Using a MOF Molecular Sieve

Effective and selective adsorption of methyl tert-butyl ether on ZSM-5 zeolite: a comparative study

Adsorptive Removal of Aromatic Organosulfur Compounds over the Modified Na-Y Zeolites

BTX Removal from Aqueous Solution Using Copper- and Nickel-Modified Zeolite 4A: Kinetic, Thermodynamic, and Equilibrium Studies

Characterization of the deposit on zeolite β catalyzed benzene propylation

Characterization of the deposit on zeolite beta catalyzed benzene propylation

Adsorptive removal of toluene and dichloromethane from humid exhaust on MFI, BEA and FAU zeolites: An experimental and theoretical study

Synthesis and Adsorption Desulfurization Performance of Modified Mesoporous Silica Materials M-MCM-41 (M = Fe, Co, Zn)