Abstract:The sole micropores strictly restrict the wide utilization of TS-1 zeolite in the catalytic fields, especially in the catalytic conversion of compounds with large molecular sizes. Here, we report a feasible and economical method to overcome this drawback. In this work, the hierarchical TS-1 zeolite was constructed via post-acid treatment, post-alkali etching, and a combination of post-acid treatment and alkali etching methods, after which, the corresponding NiMo-supported catalysts were prepared via the incipient wetness impregnation method. Then, the aforementioned materials were fully characterized using X-ray diffraction (XRD), N-2 adsorption-desorption, pyridine adsorbed Fourier transform infrared spectroscopy (Py - FTIR), H-2 temperature programmed reduction (H-2 - TPR), X-ray photoelectron spectroscopy (XPS), and high-resolution transition electron microscope (HR-TEM) to unravel the changes in the physicochemical properties caused by the post treatments. Finally, the hydrodesulfurization of dibenzothiophene (DBT) was used as a probe to assess the effects of the post-treatments on the catalytic performance of the hierarchical NiMo/TS-1 catalysts. The results showed that the MFI topology of TS-1 zeolite remained undamaged significantly and the serial hierarchical TS-1 zeolites exhibited higher specific surface areas and mesopore structures. Moreover, appropriate amounts of Bronsted acid sites were formed at the surface of the serial hierarchical TS-1 zeolites. The interaction between the active metals and the support materials was also modulated by the post-treatment of TS-1 zeolite, which resulted in better dispersion of Ni promoted MoS2 slabs with a higher proportion of NiMoS active phase, further leading to the enhanced catalytic activity and direct desulfurization pathway selectivity of the corresponding serial hierarchical NiMo/TS-1 catalysts. Among all the prepared catalysts, the catalytic activity was enhanced by approximately 1.2 times over catalyst NiMo/AT-TS-1 obtained by post-acid treatment compared to that over catalyst NiMo/TS-1 without treatment and on which the selectivity of the DDS pathway was 22% higher compared to that over catalyst NiMo/TS-1.

XPS Study on Adsorptive Desulfurization of Thiophene over Rapidly Quenched Skeletal Ni

Comparative X-Ray Photoelectron Spectroscopic Study on the Desulfurization of Thiophene by Raney Nickel and Rapidly Quenched Skeletal Nickel

Adsorption and Thermal Reaction of Dipropyl Sulfide on Skeletal Ni Adsorbents

Hierarchical TS-1 zeolite loaded with NiMo catalysts: Preparation and performance in hydrodesulfurization

Adsorption and Desulfurization Mechanism of Thiophene on Layered FeS(001), (011), and (111) Surfaces: A Dispersion-Corrected Density Functional Theory Study

Desulfurization of Thiophene from Coke- Oven- Benzene by Selective Adsorption on Zeolite Sieve Sorbent

An experimental study of Ni-Mo adsorbent for reactive adsorption desulfurization of spent tire pyrolysis oil modelled using n-hexane and thiophene

In situ FT-IR study of thiophene adsorbed on the surface of sulfided Mo catalysts

Kinetic and Thermodynamic Studies on Raney Ni/Al2O3 Adsorption for Deep Desulfurization of Benzene Stream

Density functional theory study of thiophene desulfurization and conversion of desulfurization products on the Ni(111) surface and Ni 55 cluster: implication for the mechanism of reactive adsorption desulfurization over Ni/ZnO catalysts

Exploring adsorption behavior of sulfur and nitrogen compounds on transition metal-doped Cu(100) surfaces: insights from DFT and MD simulations

Study on the removal of thiophene sulfides by porous core-shell SiO2 @Cu/Ni

Hydrodesulfurization of benzothiophene on Ni2P surface

Hydrodesulfurization of Thiophene on Ni, Mo-Supported Mcm-41 Catalysts

Skeletal Ni Catalysts Prepared from Ni–Al Alloys Rapidly Quenched at Different Rates: Texture, Structure and Catalytic Performance in Chemoselective Hydrogenation of 2-Ethylanthraquinone

Theoretical insight into the sulfurated poisoning process of rhenium-doped nickel catalyst

C-S cleavage of dibenzothiophenes with or without steric hindrance by the interface between PtS x and ZnO

Adsorption of thiophene over the transition metal-decorated C 2 N monolayer: A DFT approach

Sulfidation of Ni, Mo-containing Y zeolites and reactivity for thiophene hydrodesulfurization

Mechanistic studies and kinetics of the desulfurization of 2-phenylcyclohexanethiol over sulfided Mo, Ni-Mo, and Co-Mo on γ-Al2O3

Hreels study of adsorption of co on clean and partially oxidized Ni3Ti(0001)