Abstract:The shift of the emission band to longer wavelength (yellow-orange) of the Ba2MgSi2−xAlxO7: 0.1Eu2+ phosphor under the 350–450nm excitation range has been achieved by adding the codoping element (Mn2+) in the host. The single-host silicate phosphor for WLED, Ba2MgSi2−xAlxO7: 0.1Eu2+, 0.1Mn2+ was prepared by high-temperature solid-state reaction. It was found experimentally that, its three-color emission peaks are situated at 623, 501 and 438nm, respectively, under excitation of 350–450nm irradiation. The emission peaks at 438 and 501nm originate from the transition 5d to 4f of Eu2+ ions that occupy the two Ba2+ sites in the crystal of Ba2MgSi2−x AlxO7, while the 623nm emission is attributed to the energy transfer from Eu2+ ions to Mn2+ ions. The white light can be obtained by mixing the three emission colors of blue (438nm), green (501nm) and red (623nm) in the single host. When the concentrations of the Al3+, Eu2+ and Mn2+ ions were 0.4, 0.1 and 0.1mol, respectively, the sample presented intense white emission. The addition of Al ion to the host leads to a substantial change of intensity ratio between blue and green emissions. White light could be obtained by combining this phosphor with 405nm light-emitting diodes. The near-ultraviolet GaN-based Ba2MgSi1.7 Al0.3O7: 0.1Eu2+, 0.1Mn2+ LED achieves good color rendering of over 85.

Morphology and Luminescence Performance of the Nano-sized BaMgAl10O17:Eu2+ Phosphor with PEG As Additive

BaMgAl10O17:Eu2+ Mn2+ Blue-Green Phosphor for White Light Emitting Diodes

Preparation and Luminescent Properties of BAM Blue Phosphor Forpdp and CCFL

Microstructure and Luminescence of Surface-Coated Nano-Bamgal10o17:Eu2+ Blue Phosphor

Luminescence and Morphology of BaMgAl10O17:Eu2+ Phosphors Prepared from Different Phases of Al2O3

Synthesis and luminous characteristics of Ba2MgSi2-xAlxO7: 0.1Eu2+, 0.1Mn2+ phosphor for WLED

Enhanced Optical Performance of BaMgAl10O17:Eu2+ Phosphor by a Novel Method of Carbon Coating

Luminescence of Bax−0.05MgAl10O16+x: Eu2+0.05 with Different Ba2+ Content

BaMgAl10O17:Eu blue phosphors with MgO coating and microwave irradiation

Luminescence of Ba 0.85 MgAl 10 O 16.94 :Eu 2+ 0.09 with Different Fluxes

Luminescence of Ba0.85MgAl10O16.94 : EU0.092+ with different fluxes

Luminescence of Ba0.85MgAl10O16.94:Eu 0.09 2+ with different fluxes

Luminescent properties of SrMgAl10 O17∶Eu2+,Mn2+ high-efficiency phosphor prepared via the sol-gel combustion method

Energy Transfer and Photoluminescence of BaMgAl10O17 Co-Doped with Eu2+ and Mn2+

High Dispersibility and Enhanced Luminescence Properties of BaMgAl10O17:Eu2+ Phosphors Derived from Molten Salt Synthesis

Optimization of BaMgAl 10 O 17 :Eu 2+ Phosphors by the Substitution of Si-N Bonds for Al-O Bonds

Preparation and Luminescent Properties of SrMgAl10O17∶Eu2+ Blue Phosphor for PDP

Microwave induced solution combustion synthesis of nano-sized phosphors

Luminescent Properties of the BaMgAl10O17:Eu2+,M3+ (M = Nd, Er) Phosphor in the VUV Region

Luminescence Properties and Energy Transfer of Ba2Mg(PO4)2:Eu2+, Mn2+ Phosphor Synthesized by Co-Precipitation Method

Micro-spherical MAl2O4: Eu2+ (m=ca; Sr) Phosphors: Fast Sol-Gel Route to Monodisperse Size Distribution and Monoclinic Lattice Structure to High Efficiency