Abstract:Pavement roughness is the surface unevenness which adversely affects ride comfort. Basically, roughness is computed by measuring the vehicle suspension motion. It is expressed by International Roughness Index (IRI) with a unit of inch/mile or m/km. Roughness is very important information to the pavement management group, and maintenance and rehabilitation decisions are usually taken considering IRI and other distress data. Generally, transportation agencies do not collect IRI data annually for the entire roadway network because it requires a significant financial investment. Different types of tools are currently used to measure IRI, but these are either costly or inefficient. Recently, researchers at the Massachusetts Institute of Technology used accelerometers in cellphones to identify localized pavement defects. In the student presented herein it is shown that a smartphone based application shows great potential to capture pavement roughness as characterized by IRI. The IRI of a pavement section can be conveniently measured in a rapid and highly economical manner using this approach. In this study, three 2-mile long test sites were selected, where each having different levels of pavement distresses and roughness. IRI data was collected using an inertial profiler, and vehicle vertical acceleration data was collected using an android-based cellphone mounted on the dashboard of an inertial profiler van. Acceleration data was analyzed to obtain IRI for every 0.1-mile pavement section. Subsequently, acceleration data was collected from the same test sections using a passenger car. Results showed that the IRI estimated by the inertial profiler and cellphone application to be very similar. Results also compared favorably between trials conducted with the profiler van vs. the passenger car. Updated IRI data can be used to arrive at more effective pavement designs, maintenance, and rehabilitations decision making.

Study of On-vehicle Highway Smoothness Determination Instrument Based on ARM7

Low-Cost Portable Road Smoothness Testing Method Based on Pseudo-Vibration Velocity Range

A Study on the System of Road Roughness Simulation and its Visualization

Low cost ultrasonic roughometer for pavement roughness measurement

Comparison of Smartphone-Based and Drone-Based Approaches for Assessing Road Roughness

Development and Preliminary Evaluation of a Varying-Speed Road Profiler

Research on the Online Measurement of Automobile Engine Speed Based on Vibration Analysis

Vehicle parameter identification and road roughness estimation using vehicle responses measured in field tests

Estimation of Road Roughness Based on Both the Sprung and Unsprung Response of a Moving Vehicle over Ordinary Roads: Modeling, Experiments and Discussions

Research on rapid measurement of medium short wave longitudinal road profiles

Assessing and Mapping of Road Surface Roughness based on GPS and Accelerometer Sensors on Bicycle-Mounted Smartphones

Analysis on Measuring Technology of Road-roughness and Its Development

Study on Vehicle–Road Interaction for Autonomous Driving

Study on effect of pavement roughness to ride comfort

A high-precision two-parameter road roughness grading and identification methodology across multiple frequency intervals

An Experiment on Measurement of Pavement Roughness via Android-Based Smartphones

Development of Automated Inspection System for Highway Surface Distress

Experiment on Real-time Test Method for Automotive Suspension Distance Based on Acceleration

Driving Safety Evaluation and Early Warning of Mountain Highway Based on Vehicle-Pavement Coupling Model

Optimization and testing of suspension system of electric mini off-road vehicles

Use of Cellphone Application to Measure Pavement Roughness