Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. Based on a dual track road shape meter, various road roughness was measured. It was discovered that the road grading method in ISO 8608 assumes a constant waviness value of W = 2 with a one-straight line approximation, but it could not accurately fit and grade the measured road roughness. A high-precision piecewise fitting function for the low-frequency and high-frequency parts of the road roughness power spectral density (PSD) is established. A high-precision two-parameter grade method in multiple frequency bands for road roughness is proposed (Gq(n0), the geometric average of the road roughness index at n0, W, the waviness, is the slope of the road roughness PSD fitting expression in the double logarithmic coordinate system). According to the vehicle driving performance obtained by simulation, the grading method is verified. For Paved and Undulating roads, compared to the road roughness classification method in ISO 8608, the performance simulated based on the grade results of the two parameters grading method are closer to the performance simulated based on the measured road roughness. The grading method proposed in this paper can more accurately fit and classify the measured road roughness. The influence of these parameters at each frequency interval on vehicle driving performance is studied. A two-parameter identification method for road roughness PSD at variable intervals over a large frequency range is proposed. In the double logarithmic coordinate system, this method divides the selected spatial frequency into three sub-intervals along the abscissa, in each sub-interval, the parameters Gq(n0) and W are identified separately. This method can provide effective control inputs for the vehicle's active or semi-active suspension system.

A Road Grade Recognition Method Based on Longitudinal Acceleration

A Research on the Resistance Simulation Method for Multi-axle Vehicle Driving on Complex Road

Torque-based vehicle load recognition method

Experimental Study of Road Identification by LSTM with Application to Adaptive Suspension Damping Control

Road grade estimation for vehicle emissions modeling using electronic atmospheric pressure sensors

Road Slope Estimation Based on Acceleration Adaptive Interactive Multiple Model Algorithm for Commercial Vehicles

Real-Time Estimation of Vehicle Mass and Road Grade Based on Multi-Sensor Data Fusion

Driving performance grading and analytics: learning internal indicators and external factors from multi-source data

A Response-Type Road Anomaly Detection and Evaluation Method for Steady Driving of Automated Vehicles

Low-Cost Portable Road Smoothness Testing Method Based on Pseudo-Vibration Velocity Range

Research on rapid measurement of medium short wave longitudinal road profiles

Vehicle Mass and Road Grade Estimation Based on Extended Kalman Filter

A high-precision two-parameter road roughness grading and identification methodology across multiple frequency intervals

Road Surface Pits and Speed Bumps Recognition Based on Acceleration Sensor

Real-Time Estimation Of Vehicle'S Lateral Dynamics At Inclined Road Employing Extended Kalman Filter

An Efficient Real-Time Vehicle Monitoring Method

Vehicle parameter identification and road roughness estimation using vehicle responses measured in field tests

Automatic Road Condition Measuring System for Intelligent Small Car Based on Accelerometer Sensor

Real-time road condition estimation for four-wheel-drive vehicle

Research on the Method of Whole Vehicle Load Spectrum Compilation Based on Road Surface irregularity

Longitudinal velocity and road slope estimation in hybrid electric vehicles employing early detection of excessive wheel slip