Piyasak Thiandee,Boonsap Witchayangkoon,Sayan Sirimontree,Ponlathep Lertworawanich
Abstract:The study focuses on the experiment of using three different smartphones to collect acceleration data from vibration for the road roughness detection. The Android operating system is used in the application. The study takes place on asphaltic pavement of the expressway system of Thailand, with 9 km distance. The run vehicle has an inertial profiler with laser line sensors to record road roughness according to the IRI. The RMS and Machine Learning (ML) methods are used in this study. There is different ability of each smartphone to detect the vibration, thus different detected values are obtained. The results are compared to the IRI observation. ML method gives better result compared to RMS. This study finds little relationship between IRI and acceleration data from vibration collected from smartphones.
What problem does this paper attempt to address?
The problem that this paper attempts to solve is: How to use smart phones based on the Android system to measure the road smoothness (i.e., road surface roughness). Specifically, the research aims to collect vibration data caused by uneven road surfaces during vehicle driving through the built - in accelerometer of smart phones and evaluate the relationship between these data and the International Roughness Index (IRI). In this way, the researchers hope to find a low - cost and efficient method to detect and quantify road smoothness.
### Research Background
Road smoothness is crucial to the driving experience. It not only affects driving comfort but also is closely related to factors such as traffic accidents, vehicle maintenance costs, and fuel consumption. Traditional road smoothness measurement methods usually rely on expensive professional equipment, such as inertial profilers and laser sensors. With the development of smart phone technology, more and more research attempts to use sensors in smart phones (such as accelerometers) to detect road smoothness. The advantage of this method is that smart phones have a high penetration rate, are low - cost, and are easy to operate.
### Research Methods
This research selected three smart phones of different brands (HONOR 10, NOKIA 7 PLUS, and SAMSUNG GALAXY A8) and conducted experiments in the highway system in Thailand. During the experiment, the smart phones were fixed on the side window of a pickup truck to ensure that their accelerometers could freely sense vibrations. The researchers developed an application named "Road Surface Survey (RSS) App" for real - time recording of acceleration data. In addition, the experimental vehicle was equipped with an inertial profiler for synchronously recording IRI values.
### Data Processing and Analysis
To analyze the relationship between the vibration data collected by smart phones and IRI values, the researchers adopted two methods:
1. **Root Mean Square (RMS) Method**: The calculation formula is \(RMS = \sqrt{x^{2}+y^{2}+z^{2}}\), where \(x, y, z\) represent accelerations in three directions respectively.
2. **Machine Learning (ML) Method**: The TAN - SIGMOID transfer function was used for training and prediction. The transfer function formulas are as follows:
\[
y=\frac{2}{1 + e^{- 2a}}-1
\]
\[
a = b+\sum_{i = 1}^{n}P_{i}W_{i}
\]
where \(W\) is the weight, \(b\) is a constant, \(P\) is the acceleration value obtained from the smart phone, and \(i\) to \(n\) represent the time series.
### Experimental Results
The research shows that the accelerometers of different smart phones have different sensitivities to vibrations, resulting in differences in the collected data. Overall, the ML method performs better than the RMS method in predicting IRI values. However, the research also found that there is a weak correlation between the vibration data collected by smart phones and IRI values, especially in long - distance tests. This may be because the installation method of smart phones is limited, so that they can only sense vibrations in one direction.
### Conclusions
This research shows the potential of using smart phones to measure road smoothness. Especially in short - distance tests, the ML method can provide relatively accurate results. However, due to the limitations of smart phone sensors, it is still difficult to achieve the same level of accuracy as professional equipment at present. Future research can further optimize the sensor installation method and data processing algorithm to improve the measurement accuracy.
### Keywords
Pavement evaluation; Road surface smoothness; Root Mean Square (RMS); Smart phone accelerometer; Machine learning; Pavement management