Synthesis and modification of water-bome polyurethane

Tu Weiping,Hu Jianqing

DOI: https://doi.org/10.3969/j.issn.1006-2556.2007.06.009

2007-01-01

Abstract:This paper introduces water-borne PUs about their synthesis technology, composite modification and crosslink technology,and test,analysis and token method; summaries the relation of structure and performance of water-borne PU;and forecasts the development trend of water-borne PU.

What problem does this paper attempt to address?

Synthesis and modification of waterborne polyurethane adhesive

Wang Hong-zuo,Wang Ying

DOI: https://doi.org/10.3969/j.issn.1001-5922.2012.07.012

2012-01-01

Abstract:The preparation principles,methods and developments of waterborne polyurethanes adhesive were introduced.The major modification methods of waterborne polyurethane adhesive were also reviewed briefly.
Study Progress in Water-borne Polyurethane

LI Wei-guo,HUANG Ke-lin,LIAO Xiao-xin,LI Ke-xian,LUO Su-juan,LIU Yu-hong,HUANG Shang-shun,HE Yao-liang

DOI: https://doi.org/10.3969/j.issn.1671-9905.2009.11.006

2009-01-01

Abstract:The preparation and modification methods of the water-borne polyurethane were introduced.Some suggestions for the future development were put forward.
Synthesis and characterization of compound modification waterborne polyurethane

KE Zhi-feng,XIA Zheng-bin,WANG Guo-you,CHEN Huan-qin

2009-01-01

Abstract:The polyurethane dispersion(WPU) was prepared by using toluene diisocyanate(TDI),polyether binary alcohol(N220),1,4-butanediol(BDO) and dimethylol propionic acid(DMPA) via the acetone method.Then the WPU was crosslinking modified by trimethylol propane(TMP)and modified by copolymerization with epoxy resin and acrylate.The core-shell crosslinking WPU was formed with acrylate core and polyurethane shell.The effects of the content of DMPA,TMP,epoxy resin(E-20) and MMA on the properties of the film such as water resistance were investigated by the analysis of particle size and viscosity of the emulsion and the water resistence,hardness and contact angle of the film and TEM observation.The optimum material ratio was determined.The results showed that the average particle size of the emulsion with the mass fraction of DMPA,E-20,TMP and MMA 7.5%,6%,1% and 20% respectively was 80nm and the emulsion had moderate viscosity,good mechanical properties and improved water resistance.
Synthesis and Application of Hydroxyethyl Methacrylate Modified Waterborne Polyurethane

LI Jinliang,TIAN Yanhong,ZHANG Xuejun,LI Chen,HU Qi

DOI: https://doi.org/10.3969/j.issn.0438-1157.2013.06.047

2013-01-01

Abstract:Waterborne polyurethane(WPU)was prepared by using toluene diisocynate(TDI)and polyethylene glycol(PEG)as raw materials,and 2,2-dimethylolbutyric acid as chain extender.Hydroxyethyl methacrylate(HEMA)was used to terminate WPU.The self-emulsifying method was adopted to prepare HEMA-grafted WPU(HEMA-WPU)emulsion.Fourier transform infrared(FT-IR)and nuclear magnetic resonance(NMR)and thermogravimetric analysis(TG)were used to characterize the molecular structure and thermal endurance of HEMA-WPU.Compared with WPU,the thermal endurance of HEMA-WPU was raised obviously.The inter-laminar shear strength(ILSS)of carbon fiber/epoxy resin composite samples after sizing by the prepared emulsion was raised by 7.5%,reaching 64.5 MPa,compared with the un-sized samples.
New Progress of Waterborne Polyurethane

吕维忠,涂伟萍,陈焕钦

DOI: https://doi.org/10.3969/j.issn.1004-2849.2003.06.015

2003-01-01

Abstract:The class and preparation of waterborne polyurethane were detailed. The choice of material to synthesize waterborne polyurethane and the design of prescription were studied. The performance of waterborne polyurethane and it's improving were detailedly discussed. Some suggestion of progress of waterborne polyurethane for the future was put forward.
Advances in Modification of Waterborne Polyurethane

ZHOU Ming-ji,JIAO Qing-ze,ZHAO Yun

DOI: https://doi.org/10.16606/j.cnki.issn0253-4320.2011.s2.016

2011-01-01

Abstract:Various modified waterborne polyurethane using acrylate,organic silicone,organic fluorine,epoxy resins,nano-materials and composite are summarized in this paper.The research progress in preparation and application of these materials based on different features are introduced.Finally,the prospective development of waterborne polyurethane is also put forward.
Modified waterborne polyurethane and its adhesive properties

ZHOU Wei,FU He-qing

DOI: https://doi.org/10.3969/j.issn.1001-5922.2013.10.040

2013-01-01

Abstract:The modification methods of waterborne polyurethane was summarized,including the modification with epoxy resins,acrylates,organic silicons,organic fluorine compounds,nanomaterials and the multi-modification.The advantages and disadvantages of these modification methods were compared.The problems of the waterborne polyurethane adhesives were analyzed,and the development trend of the waterborne polyurethane adhesives was put foward.
Research progress of modification technology for waterborne polyurethane

YAN Caibin,FU Heqing

2011-01-01

Abstract:The modification of waterborne polyurethane are summarized,including cross-linking modification,acrylate modification,epoxy resin modification,organic silicon modification,organic fluorine modification,nanomaterials modification,hyperbranched prepolymer modification and multi-modification.The methods and advantages of each modification technology are compared.The modification development of waterborne polyurethane is discussed.
Research and Modification of Waterborne Polyurethane Adhesives

ZHANG Yin-ling,HUANG Ying,NIU Lei

DOI: https://doi.org/10.3969/j.issn.1004-2849.2010.11.014

2010-01-01

Abstract:The some performances(such as water resistance,mechanical properties,bonding strength,thermal stability and other performances) of waterborne polyurethane(WPU) adhesives are usually lower than those of solvent types adhesives,so it's necessary to modify WPU.The modified methods of WPU adhesives,including changing polyol types,regulating ionic neutralization degree,increasing ionic contents,forming interpenetrating polymer networks structure,using optimum polyisocyanate curing agent and clay concentration,were introduced.The research developments of WPU adhesives were also summarized at home and abroad.The possible development trends were indicated for WPU adhesives.
Research Progress on Waterborne Polyurethane Adhesive

GUO Wen-jie,FU He-qing,HUANG Hong,CHEN Huan-qin

DOI: https://doi.org/10.3969/j.issn.1001-5922.2007.04.013

2007-01-01

Abstract:The preparation of waterborne polyurethane was introduced.The research progress on waterborne polyurethane adhesive was summarized.The methods of improving the properties of the waterborne polyurethane adhesive,such as heat-durability,resistance to water,tack,wetting property and drying rate,were analyzed.
Progress in Synthesis of High Solid Content Water - Borne Polyurethane

Li-fen KONG,Hua-yu LIN,Hui LIANG,Jiang LU

DOI: https://doi.org/10.3969/j.issn.1001-0017.2007.06.012

2007-01-01

Abstract:In contrast to the solvent-berne polyurethane,the water-borne polyurethane has advantages of being free of toxicity and pollution and not flammability etc.,and it thus has been used extensively in the fields of leather and automobile decoration,fiber treatment,additive for paper making industry,coatings and adhesives.However,the drying time for water-borne polyurethane is longer than that for solvent-borne polyurethane when they have the same solid content.Increasing the solid content is one of the most effective ways to solve this problem.The progress in synthesis of high solid content water-berne polyurethane is reviewed,the methods for increasing the solid content are analyzed from the aspects of raw materials selection and dispersion technology.
Progress in Studies on Sulfonated Waterborne Polyurethane

Ning Lei,Xia Zhengbin,Peng Wenqi,Shen Huifang,Chen Huanqin

DOI: https://doi.org/10.3969/j.issn.0253-4312.2010.11.018

2010-01-01

Abstract:The properties and characteristics of sulfonated-waterborne polyurethane(WPU) were described in this paper,with emphasis on the types and the preparation techniques of sulfonated-WPU.There are various ways to incorporate the hydrophilic sulfonate groups into polyurethane macromolecules,one of which is using small molecular chain extender with sulfonate groups,and another is using polyester or polyether polyols with sulfonate groups or both of them.In addition to hydrophilic sulfonate groups,carboxylic acid groups and/or nonionic hydrophilic groups may also be introduced simultaneously in the molecular structure of waterborne polyurethane,forming a mixed internal emulsifier,which can greatly improve the stability of synthesizing process of WPU and reduce the total content of hydrophilic groups,thus improving the water-resistance and other physical-chemical properties of WPU.
Synthesis Technology and Properties of Waterborne Polyurethane Modified by Epoxy Resin

Zhu Lilan,Lin Xufeng,Qian Jun,Han Zhewen

DOI: https://doi.org/10.3969/j.issn.0253-4312.2012.04.010

2012-01-01

Abstract:The title waterborne polyurethane emulsion modified by epoxy resin was prepared using toluene diisocyanate(TDI),polyether(GE-210),1,4-butanediol(BDO),dimethylolpropionic acid(DMPA),epoxy resin and hydroxypropyl acrylate(HPA).Effects of the molar ratio of the —NCO and the —OH group in the prepolymer(R),the content of small molecule chain extenders,hydrophilic chain extender and epoxy resin on the size,viscosity,stability of the emulsion and water-resistance of the film was studied.The experimental results showed that the water resistance of WPU was improved,when the R was 6~7,BDO addition level was about 7%~8%,DMPA 6%~7%,epoxy resin 6%~7%,as well as good appearance and stability of the emulsion,which could be used as a WPU resin for waterborne coatings with excellent performance.
Progress on research upon polyurethane adhesives

QIAO Ji-chao,HU Xiao-ling,GUAN Ping

DOI: https://doi.org/10.3969/j.issn.1002-7432.2006.05.012

2006-01-01

Abstract:Preparation,properties and kinds of polyurethane adhesives were described.The domestic and abroad advance on research,development and application of polyurethane adhesives in the recent years were reviewed,especially was the development trend and main kinds of polyurethane adhesives widely used was introduced including waterborne PU adhesive,two component PU adhesive,one component PU adhesive and others such as thermoplast PU adhesive,blook-modified PU adhesive,DMTDA-crosslinked PU adhesive,acrylate copolymer-modified PU adhesive,polyether PU adhesive and et al.It was pointed out that polyurethane adhesives were promising technology.
Synthesis and modification of waterborne polyurethane derived from hybrid CO2-based polyols

Yueqing Chen,Zhenhong Huang,Haijian Chen,Jiaoyan Ai,Lina Song,Baohua Liu

DOI: https://doi.org/10.1007/s10965-024-04139-5

IF: 3.061

2024-10-01

Journal of Polymer Research

Abstract:Waterborne polyurethanes emulsions (WPU) based on polyethylene carbonate diol (PECD) were synthesized, characterized and modified by polypropylene carbonate diol (PPCD) and organosilicon KH-792. The mechanical, thermal and hydrolysis resistance properties of waterborne polyurethanes were comprehensively investigated. The results show that PECD based WPU has very excellent mechanical properties. The tensile strength and the elongation at break the PU was up to 73 MPa and 1040%, which was much higher than that reported for similar types of PPCD-based WPU. It was found that water absorption of PECD based WPU can be decreased dramatically, from 40.9% to 21.1%, after 50% PECD was replaced by PPCD, while tensile strength only decreased from 73.0 MPa to 63.4 MPa. The addition of KH-792 has great influence on PECD based WPU, when 1% KH-792 was added, the water absorption rate decreased from 21.1% to 11.88%, the mechanical strength remained at 63.3 MPa, the WPU film remained transparent after soaking in 80 °C hot water for 4 h.

polymer science
Progress of modification of waterborne polyurethane adhesive

DENG Wei,HUANG Hong,FU Heqing

2011-01-01

Abstract:The classification and preparation of waterborne polyurethane adhesive are introduced.The modification methods of waterborne polyurethane,such as acrylate modification,epoxy resin modification,organic fluorine modification,silicone,nanomaterials modification,multi-modification and hyperbranched prepolymer modification are summarized.The advantages and disadvantages of these modification methods are compared,and the application of the modified waterborne polyurethane adhesive is proposed.The development of waterborne polyurethane adhesive is discussed.
Synthesis of Waterborne Polyurethane Modified by Epoxy Resin and Acrylic Ester

HUANG Hong,FU He-qing,DENG Yan-wen,CHEN Huan-qin

2006-01-01

Abstract:The waterborne polyurethane was modified by epoxy resin E-44 and methyl methacrylate (MMA) via copolymerization of hydroxyl ethyl acrylate ( HEA) and MMA to produce the core-shell crosslink composite emulsion polyurethane-acrylate (PUA), in which the core part is formed by acrylic ester, the shell part is PU and HEA forms the bridge between the core and shell. The modified waterborne polyurethane combines the outstanding properties of those three kinds of polymers mentioned above, e.g. good flexibility, strong adhesion and low-temperature resistance just like the polyurethane, water resistance and good weathering quality like acrylate, and high modulus and chemical resistance like epoxy resin. The experimental results show that the hardness, tensile strength and water resistance of PUA film increase with increasing the amount of epoxy resin E-44 and MMA, but its elongation at break and the stability of PUA composite emulsion will be decreased. The roundup properties of the modified waterborne polyurethane will be better if the amount of E-44 and MMA added are 4% and 20%～30%, respectively.
Study on Syntheses and Properties of Water-borne Coating of Polyurethane Modified by Epoxy Resin

Jinqing Qu

2002-01-01

Abstract:The water-borne coating of polyurethane(WPU) was prepared by the reaction of epoxy resin with polyepoxyglcol, dimethoxypropionic acid and toluene diisocyanate (TDI). It was found that the hardness and tensile strength of coating film of WPU increased with decreasing in epoxy value of epoxy resin, and the elongation at break decreased with decreasing in epoxy value of epoxy resin. When the epoxy value of epoxy resin was chosen to be 0.44, the hardness of 0.7 for coating film of modified WPU can be attained. The mechanical properties of coating film of modified WPU increase with increasing the amount of epoxy resin. The storage stability of modified WPU is good as using the post-addition technology to add epoxy resin. The GPC measuring found that the molecular weight of WPU modified by epoxy resin is higher than that of traditional WPU. The properties testing showed that the waterborne polyurethane modified by epoxy resin has high hardness, good water resistance, resistance to petrol, and excellent adhesive to based material.
Study on the Synthesis and Properties of Waterborne Polyurea Modified by Epoxy Resin

Jing Wang,Jihu Wang,Song Wang,Shaoguo Wen,Kaimin Chen,Chen Xie,Chunping Yuan

DOI: https://doi.org/10.3390/polym14112283

IF: 5

2022-06-04

Polymers

Abstract:The most notable features of polyurea are its fast reaction, energy-saving and high efficiency. In order to meet the needs of environmental protection, waterborne polyurea (WPUA) has become a research hotspot. However, the presence of hydrophilic groups in WPUA reduces its solvent resistance, heat resistance and mechanical properties. Therefore, it is necessary and valuable to develop a high-performance WPUA. In this study, epoxy-modified waterborne polyurea (WPUAE) emulsions were prepared using epoxy resin as a modifier. Fourier transform infrared spectroscopy (FT-IR) showed that E44 was successfully introduced into the molecular chain of WPUA. The WPUAE was tested for gel fraction, adhesion, contact angle, solvent resistance, tensile properties and thermal stability. The results showed that when the E44 content was 8 wt%, the performance of WPUAE was best, the adhesion of WPUAE coating film was 1.53 MPa, the gel fraction, water contact angle, water absorption, toluene absorption, tensile strength and decomposition temperature were 96.94%, 70.3°, 16.43%, 131.04%, 9.05 MPa and 365 °C, respectively. The results showed that epoxy resin as an emulsion modifier improved the comprehensive properties of WPUA.

polymer science
Contemporary Breakthroughs and Diverse Chemistry Innovations in Waterborne Polyurethane

K. L. Chai,Min Min Aung,Davin Yap Kin Yew,Mohd Sukor Su’ait,Azizan Ahmad,Narges Ataollahi,Lee Tian Khoon

DOI: https://doi.org/10.1007/s10924-024-03437-9

IF: 4.705

2024-10-25

Journal of Polymers and the Environment

Abstract:Polyurethane, a hydrophobic polymer with limited water solubility, is widely employed in applications including foam insulation, adhesives, coatings, and both flexible and rigid plastics. Waterborne polyurethane (WBPU) has emerged as a focal point due to its water-dispersible nature Its beneficial qualities, such as low emissions of volatile organic compounds (VOCs), simplicity of use, and environmental friendliness, are the reason for its appeal. WBPU is recognized for being non-toxic, non-flammable, and low VOC properties so it can help prevent the pollution of air water rather than increase. Moreover, it exhibits remarkable adhesion properties to a wide range of surfaces, such as glass and polymeric fibres. These exceptional qualities of WBPU have piqued the interest of researchers worldwide. This review focuses on the fundamental principles of WBPU chemistry and explores its physical attributes. It proceeds to provide an extensive examination of various studies, shedding light on the reaction procedures and mechanisms involved. Additionally, the article delves into the modifications introduced in the production process, the selection of source materials, and associated limitations.

engineering, environmental,polymer science

Synthesis and modification of water-bome polyurethane

Synthesis and modification of waterborne polyurethane adhesive

Study Progress in Water-borne Polyurethane

Synthesis and characterization of compound modification waterborne polyurethane

Synthesis and Application of Hydroxyethyl Methacrylate Modified Waterborne Polyurethane

New Progress of Waterborne Polyurethane

Advances in Modification of Waterborne Polyurethane

Modified waterborne polyurethane and its adhesive properties

Research progress of modification technology for waterborne polyurethane

Research and Modification of Waterborne Polyurethane Adhesives

Research Progress on Waterborne Polyurethane Adhesive

Progress in Synthesis of High Solid Content Water - Borne Polyurethane

Progress in Studies on Sulfonated Waterborne Polyurethane

Synthesis Technology and Properties of Waterborne Polyurethane Modified by Epoxy Resin

Progress on research upon polyurethane adhesives

Synthesis and modification of waterborne polyurethane derived from hybrid CO2-based polyols

Progress of modification of waterborne polyurethane adhesive

Synthesis of Waterborne Polyurethane Modified by Epoxy Resin and Acrylic Ester

Study on Syntheses and Properties of Water-borne Coating of Polyurethane Modified by Epoxy Resin

Study on the Synthesis and Properties of Waterborne Polyurea Modified by Epoxy Resin

Contemporary Breakthroughs and Diverse Chemistry Innovations in Waterborne Polyurethane