Chromium-free Passivating Technology Based on BTA and TTA for Copper
Jiu-long SONG,Wen-ge CHEN,Yan ZHENG
DOI: https://doi.org/10.16490/j.cnki.issn.1001-3660.2018.01.026
2018-01-01
Surface Technology
Abstract:The work aims to improve corrosion resistance of pure copper surface. Pure copper was passivated by com-pounding benzotriazole (BTA) and methyl benzotriazole (TTA), and effects of passivation temperature, time and pH on passiva-tion of the pure copper were analyzed. Microstructure and corrosion resistance of different passivation solutions and passivation films were studied in electrochemical method, and by performing nitric acid droplet experiment and neutral salt spray test, and using SEM, and the study results were compared with chromate passivation results. A clear and dense passivation film of better corrosion resistance formed after treatment of pure copper provided with following process parameters: 4 g/L BTA, 4 g/L TTA, 20 mL/L H2O2, pH 4, passivation time 3 min, passivation temperature 40 ℃, natural air-drying aging duration 1 day. In the salt spray test, corrosion rate of the film was low, and average corrosion rate was 0.76 mg/d, corrosion current density was only 1.5660 μA/cm2, inhibition rate was 81.9%, which was close to corrosion resistance of chromate passivation. Provided with ap-propriate passivation process, after the passivation by BTA and TTA, Cu/Cu2O/Cu(I)BTA polymer protective film forms on the surface of substrate. TTA non-polar methyl-forming monolayer film is more hydrophobic, both of which act together to form a more dense passivation film covering the surface of the copper substrate, thus significantly improving corrosion resistance of pure copper.