Abstract:CdS nanorods of high aspect ratio were synthesized through the route of chemical bath deposition under a mild condition. Diphenylthiocarbazone (DPTA) was employed as an organic additive for the synthesis of CdS nanorods. The crystalline and microstructure of CdS nanorods were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The XRD patterns indicate the existence of both cubic and hexagonal phases in the samples. The sample with the pH value of 10.5 showed a hexagonal (111) peak of maximum intensity, indicating the preferential orientation along the c axis of hexagonal CdS phase. Meanwhile, the cubic phase appeared at the pH value of 10.5. The TEM images reveal that the morphology of CdS could be controlled by adjusting the pH value. Highly crystalline CdS nanorods with the diameter of about 50 nm and the length of about 3 mu m were obtained at the pH value of 10.5. The effects of the pH value on the formation of CdS nanorods were studied. The electrical properties of the samples were also investigated. The results show that the sample prepared with DPTA as the organic additive exhibited a much lower resistance than those prepared with PVA as the additive and in pure ethanol. There were two big pi bonds in a DPTA molecule, which benefited the electron transfer. Finally, the growth mechanism of CdS nanorods and electron transfer in DPTA modified CdS nanorods were discussed.

Polymer-Controlled Growth of CdS Nanowires

A chemical solution transport mechanism for one-dimensional growth of CdS nanowires

Solvothermal Synthesis and Characterization of Uniform CdS Nanowires in High Yield

Directional CdS Nanowires Fabricated by Chemical Bath Deposition

Controlled nucleation and growth of CdS nanoparticles in a polymer matrix

High Yield CdS Nanowires Synthesized by Solvothermal Routes and Novel Diauxic Growth Mechanism

The bismuth triiodide-assisted horizontal growth of CdS nanowires and CdO–CdS necklace-like nanowires

Preparation and Growth Mechanism of CdS Nanorods via Chemical Bath Deposition

Fabrication of Well-Aligned and Highly Dense Cadmium Sulfide Nanowires on DNA Scaffolds Using the Poly(dimethylsiloxane) Transfer Method

Single crystalline CdS nanorods fabricated by a novel hydrothermal method

Synthesis of Single Crystalline CdS Nanorods by a PVP-assisted Solvothermal Method

Diameter- and current-density-dependent growth orientation of hexagonal CdSe nanowire arrays via electrodeposition.

Ligand-Assisted Solvothermal Growth of Cds Nanowires

Synthesis and Characterization of Large-Scale Hierarchical Dendrites of Single-Crystal CdS

The Control of the Growth Orientations of Electrodeposited Single-Crystal Nanowire Arrays: a Case Study for Hexagonal CdS.

Selected-Control Synthesis of Zno Nanowires and Nanorods Via A Peg-Assisted Route

Controlled Synthesis of CdE (E = S, Se and Te) Nanowires

Controllable Synthesis of Corrugated CdS Nanoribbons of High Quality by Vapor–liquid–solid Method

Shape-Controlled Synthesis Of Cds Nanocrystals In Mixed Solvents

Catalytic Growth of Large-Scale Single-Crystal CdS Nanowires by Physical Evaporation and Their Photoluminescence

Single Crystalline Cadmium Sulfide Nanowires with Branched Structure