Effects of CVD-Carbon Nanotubes Growth Temperatures on Field Emission Properties

WANG Li-li,SUN Z,CHEN Ting

DOI: https://doi.org/10.3321/j.issn:1000-7032.2006.01.023

2006-01-01

Chinese Journal of Luminescence

Abstract:Carbon nanotubes field emission display (CNTs-FED) has been regarded as the most promising flat panel display due to its high definition, low power consumption, high brightness, fast response time, wide work temperature range and low cost. As the key material, the properties of CNTs will affect FED characters directly. CNTs with good field emission properties were needed for the FED. The CNTs were synthesized by chemical vapour deposition (CVD) in the temperature range of 500 ℃ ~750 ℃. The morphologies of CNTs depending on growth temperatures were characterized by scanning electron microscope. The as-grown CNTs were mixed with conductive pastes, then screen-printed on the glass substrate coated with a silver conducting layer to form a FED cathode. The dependence of FED properties on the CNTs growth temperatures was studied by using current-voltage (I-V) and luminescence image measurements. The SEM images shew that with the temperature increasing from 500 ℃ to 700 ℃, the average diameter of CNTs decreased. By the I-V and luminescence image measurements, it was found that the higher growth temperature, the better FED properties, i.e. lower turn-on emission field , higher emission current and more uniform emission.The field emission experiment of the CNTs cathodes indicated that there is an optimal temperature range (600~700 ℃) for CNTs growth and being used as field emission cathode. With good pro- perties , bright and stable anode image was observed in diode mode field emission. These results suggested that CVD grown CNTs could be used for cathode fabrication of large area field emission display.