Abstract:In this work, we quantify field emission properties of cathodes made from carbon nanotube (CNT) fibers. The cathodes were arranged in different configurations to determine the effect of cathode geometry on the emission properties. Various geometries were investigated including: 1) flat cut fiber tip, 2) folded fiber, 3) looped fiber and 4) and fibers wound around a cylinder. We employ a custom field emission microscope to quantify I-V characteristics in combination with laterally-resolved field-dependent electron emission area. Additionally we look at the very early emission stages, first when a CNT fiber is turned on for the first time which is then followed by multiple ramp-up/down. Upon the first turn on, all fibers demonstrated limited and discrete emission area. During ramping runs, all CNT fibers underwent multiple (minor and/or major) breakdowns which improved emission properties in that turn-on field decreased, field enhancement factor and emission area both increased. It is proposed that breakdowns are responsible for removing initially undesirable emission sites caused by stray fibers higher than average. This initial breakdown process gives way to a larger emission area that is created when the CNT fiber sub components unfold and align with the electric field. Our results form the basis for careful evaluation of CNT fiber cathodes for dc or low frequency pulsed power systems in which large uniform area emission is required, or for narrow beam high frequency applications in which high brightness is a must.

Optimization of Field Emission Properties of Carbon Nanotubes Cathodes by Electrophoretic Deposition

Achieving Uniform Field Emission from Carbon Nanotube Composite Cold Cathode with Different Carbon Nanotube Contents: Effects of Conductance and Plasma Treatment

All carbon nanotube based flexible field emission devices prepared through a film transfer method

Low Temperature Growth of Carbon Nanotubes by Chemical Vapor Deposition for Field Emission Cathodes

Fabrication and electrical characteristics of carbon nanotube field emission microcathodes with an integrated gate electrode

Outstanding Field Emission Properties Of Wet-Processed Titanium Dioxide Coated Carbon Nanotube Based Field Emission Devices

Improvement of the Field Emission from Screen Printed Carbon Nanotube Cold Cathode by Applying Electrical Field

Flat-panel luminescent lamp using carbon nanotube cathodes

Electrophoresis Deposition of Carbon Nanotubes in MEMS Structures and Their Field Emission Characteristics

Cold linear cathodes with carbon nanotube emitters and their application in luminescent tubes

P2&#x2013;5: Fabrication and Characterization of 4.3-Inch Carbon Nanotube Cold Cathodes for Field Emission Flat Panel Light Source

Enhanced Field Emission of Single-Wall Carbon Nanotube Cathode Prepared by Screen Printing with a Silver Paste Buffer Layer

Fabrication Of Field Emission Cathode By Spraying Multiwalled Carbon Nanotubes On Screen Printed Substrate

Simulation Study of Carbon Nanotube Cold Cathodes with Mesh Grid Structure

Mechanical Fabrication of Carbon Nanotube Films and Their Field-Emission Properties

The Performance of Thin Film Carbon Materials and Carbon Nanotubes As Cold Cathodes

Investigation of Field Emission Properties of Carbon Nanotube Arrays of Different Morphologies

Field Emission Property of CNT Cold Cathode with DLC Film Deposition Treatment

Field emission microscopy of carbon nanotube fibers: evaluating and interpreting spatial emission

Low Temperature Growth of Carbon Nanotube on Glass Substrate and Its Application in Field Emission Display

Field emission and thermo-electrochemical cell performances of various types of carbon nanotubes