Abstract:Utilizing carbon nanotubes (CNTs) as substitutes for the conventional rigid indium-tin oxide (ITO) electrodes, all CNT based flexible field emission devices (FEDs) were possible to prepare with a novel film transfer method. In the method, both CNT-based flexible cathode and anode were fabricated by first attaching the vacuum filtered CNT film/mixed cellulose eater (MCE) filter membrane to an adhesive semi-cured poly(dimethyl siloxane) substrate, and then peeling off the MCE filter membrane. Effects of bending direction and bending radius on field emission properties were studied. The field emission performance of the convex bending device was worse than that of the flat device and deteriorated further with the decrease of bending radius. In contrast, the concave bending device exhibited better field emission properties than the flat device; nevertheless, its field emission properties decreased as the concave bending radius reduced below a certain value. The method achieved two successes. One is that the interfacial interaction between CNT films and the flexible substrate was greatly enhanced. The other is that the transfer process improved the field emission properties due to the increase of vertically aligned CNT tips. Compared with traditional methods applied in FED preparation, the novel modified transfer method is organic free, easy to control, cheap, and environment friendly.

Development of Carbon Nanotube/Nanofiber Field Emission Display

Low Temperature Growth of Carbon Nanotube on Glass Substrate and Its Application in Field Emission Display

All carbon nanotube based flexible field emission devices prepared through a film transfer method

Fabrication of Diode-Type Field Emission Display Module with Carbon Nanotube Cathode

Application of carbon nanotubes in displays

Carbon Nanotube Displays

Study of vacuum-sealed carbon nanotube field emission display using vacuum micro electron source based on planar gate structure

Carbon Nanotubes - New Material Applied to Field Emission Display

Development of carbon nanotube light array for large-size display

Performance Study Of Field Emission Backlight Unit And Display

Secondary Electron Emission in a Triode Carbon Nanotube Field Emission Display and Its Influence on the Image Quality

Carbon-nanotube Based Paste for Field Emission Display Application

Efficient Carbon Nanotube Field Emitter Using Electrospun Carbon Nanofibers as a Flexible Electrode

Low Temperature Growth of Carbon Nanotubes by Chemical Vapor Deposition for Field Emission Cathodes

Various Nanostuctured Carbon Films For Fed Applications

Nanostructure carbon for FED and white LED application

Carbon Nanotubes On Carbon Fabrics For Flexible Field Emitter Arrays

Driving System of 40-Inch Carbon Nanotube Field Emission Display

Fabrication of a Triode Field Emission Display Using Screen-Printing Process

Flat-panel luminescent lamp using carbon nanotube cathodes

Achieving Uniform Field Emission from Carbon Nanotube Composite Cold Cathode with Different Carbon Nanotube Contents: Effects of Conductance and Plasma Treatment