Abstract:Utilizing carbon nanotubes (CNTs) as substitutes for the conventional rigid indium-tin oxide (ITO) electrodes, all CNT based flexible field emission devices (FEDs) were possible to prepare with a novel film transfer method. In the method, both CNT-based flexible cathode and anode were fabricated by first attaching the vacuum filtered CNT film/mixed cellulose eater (MCE) filter membrane to an adhesive semi-cured poly(dimethyl siloxane) substrate, and then peeling off the MCE filter membrane. Effects of bending direction and bending radius on field emission properties were studied. The field emission performance of the convex bending device was worse than that of the flat device and deteriorated further with the decrease of bending radius. In contrast, the concave bending device exhibited better field emission properties than the flat device; nevertheless, its field emission properties decreased as the concave bending radius reduced below a certain value. The method achieved two successes. One is that the interfacial interaction between CNT films and the flexible substrate was greatly enhanced. The other is that the transfer process improved the field emission properties due to the increase of vertically aligned CNT tips. Compared with traditional methods applied in FED preparation, the novel modified transfer method is organic free, easy to control, cheap, and environment friendly.

Study of vacuum-sealed carbon nanotube field emission display using vacuum micro electron source based on planar gate structure

Fabrication and Characterization of Gated Carbon Nanotube Emitters in A Trench Structure

All carbon nanotube based flexible field emission devices prepared through a film transfer method

Electrothermal Characterization of Carbon Nanotube Field Effect Transistors (Cntfets)

In-situ studies of electron field emission of single carbon nanotubes inside the TEM

Secondary Electron Emission in a Triode Carbon Nanotube Field Emission Display and Its Influence on the Image Quality

Carbon Nanotube Displays

Development of Carbon Nanotube/Nanofiber Field Emission Display

Carbon Nanotube Technology For Solid State And Vacuum Electronics

Fabrication and electrical characteristics of carbon nanotube field emission microcathodes with an integrated gate electrode

Carbon Nanotube Lateral Field Emission Device with Embedded Field Effect Transistor

Low Temperature Growth of Carbon Nanotube on Glass Substrate and Its Application in Field Emission Display

Carbon nanotube film gate in vacuum electronic devices.

Efficient Carbon Nanotube Field Emitter Using Electrospun Carbon Nanofibers as a Flexible Electrode

A Comparative Study of Field Emission Properties of Carbon Nanotube Films Prepared by Vacuum Filtration and Screen-Printing

Lateral Field Emitters Fabricated Using Carbon Nanotubes

Achieving Uniform Field Emission from Carbon Nanotube Composite Cold Cathode with Different Carbon Nanotube Contents: Effects of Conductance and Plasma Treatment

Carbon Nanotubes - New Material Applied to Field Emission Display

Field Emission of Carbon Nanotube Films Fabricated by Vacuum Filtration

Synthesis and Characterization of Carbon Nanotube Grown on Flexible and Conducting Carbon Fiber Sheet for Field Emitter

Study On Field Emission Characteristics Of Normal-Gated And Under-Gated Carbon Nanotube Cold Cathode