Abstract:Post-drilling wireline acoustic single-well imaging technology can now detect geological structures tens of meters away from boreholes. Further development of this single-well imaging technology in the logging-while-drilling (LWD) environment will have significant values in real-time applications such as geosteering and reservoir navigation. Based on the wireline imaging application, we propose a new method for the LWD application. In wireline imaging, the four-component (4C) dipole acoustic data are azimuthally rotated to scan the reflectors around the borehole. In LWD, azimuthal scanning is achieved by drilling rotation such that the 4C dipole system in the wireline is replaced by a one-dipole-source and two-receiver LWD system, where the two receivers are mounted on opposite sides of the drill collar. For the LWD application, we first developed the theory for LWD dipole shear-wave reflection imaging and validated the theory using 3D finite-difference waveform modeling. Using the analytical solution, we analyzed the far-field radiation directivity of an acoustic LWD dipole source and the effect of drilling rotation on the shear-wave reflection imaging using the LWD acoustic system. The LWD analysis results show that, for fast formations, the SH-wave is the dominant component for imaging, whereas for slow formations, the P-wave becomes important and can be used for imaging. Our results also indicate that the reflection data acquired by the system are affected by the speed of drilling rotation. The take-off azimuth at the wave radiation may be different from the incident azimuth at the wave reception. Knowing the rotation speed, this azimuth difference can be corrected. A further advantage of using the oppositely mounted receivers is that the reflected wave arrives earlier (later) at the front (back)-side receiver; thus, the arrival time difference between the receivers can be used to eliminate the 180°-azimuth ambiguity of dipole acoustic imaging. For reflection imaging, using the proposed LWD system configuration, we tested its azimuth sensitivity and validated its 180°-ambiguity solution using synthetic LWD and field wireline dipole data. The results of this work, therefore, provide a theoretical foundation for the development of the LWD acoustic reflection imaging system.

Multipole array acoustic imaging logging system

Study on Numeric Simulation of Complex Resistivity Logging

Study of Deep-Sea High-Resolution Multi-Channel Seismic Exploring System

Modeling and Inversions of Acoustic Reflection Logging Imaging Using the Combined Monopole–dipole Measurement Mode

A Novel Lateral Resistivity Logging-While-drilling (LWD) Method in Oil-Based Drilling Fluid

HAL6505 Array Laterolog Logging Tool

Research on Detection Technology for Aligned Array Acoustic Sonde of Acoustic Logging Tool

Numerical Study on the Characteristics of Multipole Acoustic Logging While Drilling in Cracked Porous Medium

Design of a New Acoustic Logging While Drilling Tool

Processing array acoustic-logging data to image near-borehole geologic structures

Research on Quantitative Inversion Characterization of High-Definition Electrical Imaging Logging in Oil-Based Mud Based on BPNN and MPGA-LM Algorithm

Simulation and Application of a New Electromagnetic Resistivity Tool with Array Compensation Propagation While Drilling

A Universal Multi-Frequency Micro-Resistivity Array Imaging Method for Subsurface Sensing

Signal Processing Algorithm and System Realization of Broadband Parametric Array Sub-Bottom Profiler

Wavefield simulation and analysis with the finite-element method for acoustic logging while drilling in horizontal and deviated wells

Acoustic fields for monopole logging while drilling with an eccentric collar

A theoretical analysis of the logging-while-drilling dipole acoustic reflection measurement

Multi-parameter logging evaluation of tight sandstone reservoir based on petrophysical experiment

A Novel Sub-Bottom Profiler and Signal Processor

A Multi-channel Acoustic Logging Signal Dispersion Analysis Method

A New Logging-While-Drilling Method for Resistivity Measurement in Oil-Based Mud.