Abstract:Micro-nano scale pores can accurately and fastly be measured by the nuclear magnetic resonance (NMR) technique, which provides a new method to quantitatively characterize pore structures in tight sandstone. Based on the method of calibration of mercury pressure data for NMR T2 spectrum, for the measurement inaccuracy due to the mercury saturation less than 100% in tight sandstone, the mercury pressure curve and T2 spectrum is used to cumulate from the maximum pore on the right boundary to the small pores in the left, the range of pore-throat radius measured by the mercury injection in the leftward cumulative curve is selected as a comparable interval of NMR pore-throat radius, and the longitudinal interpolation method and the least square method are utilized to construct the distribution curve of pore-throat radius transformed by T2 spectrum. The modified method is used to obtain NMR T2 spectrum, conversion coefficient of pore-throat radius and pore-throat radius distribution of the Carboniferous-Permian tight sandstone gas reservoirs in the eastern Linqing depression, and characteristics of reservoir pore structures are quantitatively investigated; in addition, in combination with analysis of thin section and scanning electron microscopy, the reservoir effectiveness and cause of the pore structure variability in the tight sandstone are also well studied. The results show that the NMR pore-throat radius curve obtained by the modified method has a high consistency with the mercury injection curve, and the NMR test accuracy of tight sandstone is significantly improved. In the study area, the pore-throat radius of the Carboniferous-Permian tight sandstone mainly ranges from 0.002 to 2 μm, the pore is generally submicro-nano scale, but the pore-throat radius distribution of different types of sandstone varies significantly. The lithic quartz sandstone is rich in siliceous matter and poor in plastic detritus and matrix, generally dominated by submicro-scale pore-throats including micro-scale pore-throats; lithic feldspar sandstone and quartz-rich feldspar lithic sandstone are rich in quartz and poor in plastic detritus and matrix, dominated by submicro-nano scale pore-throats (nano-scale pore-throats predominantly); the lithic fragment-rich feldspar lithic sandstone and lithic sandstone are poor in quartz and rich in plastic detritus and matrix, mainly dominated by nano-scale pore-throats smaller than 0.05 μm. Micropetrographic components are key factors to control pore structure difference and reservoir effectiveness, and the reservoir quality may be macroscopically controlled by sedimentary microfacies; the lithic quartz sandstones of coarse- and fine-grained point bar/riverbed microfacies are the most favorable reservoirs; the lithic feldspar sandstone of fine-grained point bar microfacies, the quartz-rich feldspar lithic sandstone of fine-grained distributary channel and barrier bar microfacies are relatively favorable reservoirs, while both lithic fragment-rich feldspar lithic sandstone and lithic sandstone of tidal-flat facies are ineffective reservoirs with very poor porosity and permeability.

Multi-parameter logging evaluation of tight sandstone reservoir based on petrophysical experiment

New Insight Into Data Processing of Nuclear Magnetic Resonance Logging for Pore Structure Characterization in Tight Sandstone Reservoirs

Applications of nuclear magnetic resonance (NMR) logging in tight sandstone reservoir pore structure characterization

The quantitative evaluation method of low permeable sandstone pore structure based on nuclear magnetic resonance (NMR) logging

Comprehensive evaluation of coal-bearing tight sandstone reservoir logging in the Benxi Formation, east-central Ordos Basin

Fluid Identification Method of Nuclear Magnetic Resonance and Array Acoustic Logging for Complex Oil and Water Layers in Tight Sandstone Reservoir

Three-Water Differential Parallel Conductivity Saturation Model of Low-Permeability Tight Oil and Gas Reservoirs

Parameter evaluation method of tight carbonate reservoir using electrical imaging pores diameter spectrum

Nuclear Magnetic Resonance Logging-Based Permeability Classification Modeling for Tight Sandstone Reservoirs

Quantitative evaluation of pore structure from mineralogical and diagenetic information extracted from well logs in tight sandstone reservoirs

Quantitative characterization of pore structure of tight gas sandstone reservoirs by NMR T2 spectrum technology:a case study of Carboniferous-Permian tight sandstone reservoir in Linqing depression

Formation Evaluation Using NMR, Mud Gas, and Triple-Combo Data – A Norwegian Logging-While-Drilling Case History

New-Generation Nuclear Magnetic Resonance T1-T2 Logging–Derived Formation Evaluation in Jurassic Shale Oil Reservoirs of China

Highly Detailed Reservoir Characterization of Tight Thin Sandstone Through Geostatistical Inversion in a Gas Field China

First Application of LWD NMR and Quadrupole Sonic Measurements Derived Formation Evaluation in a Carbonate Reservoir in Sichuan Basin, China

Numerical Simulation Analysis of Control Factors on Acoustic Velocity in Carbonate Reservoirs

Effect of saturated brine with high concentration on nuclear magnetic resonance (NMR) data in high-porosity sandstone reservoirs

Estimation of Permeability from NMR Logs Based on Formation Classification Method in Tight Gas Sands

Quantitative characterization of pore structure of the Carboniferous–Permian tight sandstone gas reservoirs in eastern Linqing depression by using NMR technique

“Double sweet spot” identification method via cluster analysis of petrophysical properties from well logg data: A case study of a tight sandstone reservoir

NMR-Supported Near-Wellbore Data Analysis to Improve the Petrophysical Evaluation of a Sandstone Reservoir Drilled With Barite-Enriched Water-Based Mud