Abstract:Abstract This case study involves sand distribution prediction for the Gujiazhi and Houwujiahu gas fields in Jilin Province, China. Initial data analysis involved correcting and calibrating the well logs. Log data from 74 wells were available from the Gujiazhi field and the Houwujiahu field. This initial process also established 3-D porosity, permeability and clay volume models for each field. The Gujiazhi grid has a cell dimension of 100×100×2 meter, Houwujiahu grid 100×100×1 meter. Geostatistical inversion was conducted for a 3-D seismic volume covering both fields. Synthetic resistivity logs were generated and converted to pseudo-impedance in time, the derived reflectivity was convolved with a wavelet, and the synthetic seismogram correlated with actual seismic traces. This process was allowed to iterate until a satisfactory correlation was reached. One VSP was used for the initial time-depth conversion, and the time-depth relationship for each well was subsequently time-adjusted until the synthetic seismograms matched the actual seismic, allowing a reasonable lateral velocity variation. A common wavelet was extracted for all the wells. With the optimized time-depth control and common wavelet, resistivity inversion was conducted for the 3-D seismic grid. A 3-D reservoir geology model was generated by co-kriging, using the well log data as hard data and the inverted seismic data as soft data. The 3-D reservoir geology model from well logs showed high vertical resolution but poor lateral resolution, while the 3-D seismic-inverted model showed higher lateral resolution but poor vertical resolution. The co-kriging model showed favorable resolution both vertically and laterally. The resulting reservoir geology model provided insights into assessing the distribution of pay sands. Since in this area, resistivity is a good indicator of lithology, the study results demonstrate that geostatistical inversion of seismic data to resistivity is useful in predicting sand distribution, and for optimizing future drilling locations.

Highly Detailed Reservoir Characterization of Tight Thin Sandstone Through Geostatistical Inversion in a Gas Field China

Geostatistical Prediction of Sand Distribution of Gas Reservoir in Jilin, China

Characterization of Tight Gas Sandstone Properties Based on Rock Physical Modeling and Seismic Inversion Methods

Tight Sandstone Gas Reservoir Characterization Via Amplitude‐versus‐offset Attributes

Rock Physical Modeling and Seismic Dispersion Attribute Inversion for the Characterization of a Tight Gas Sandstone Reservoir

A Case Study for Detecting Thin Tight Sand Gas in the Sulige Gas Field from Joint PP/PS Geostatistical AVO Inversion

Using a Dynamic Representation of Sedimentary Structural Features in Prestack Inversion: A Case Study in a Tight Sandstone in the Sichuan Basin

Reservoir Characterization Through Geostatistical and Azimuthal Inversion Techniques – A Case Study for Carbonate Reservoir

Estimation of Reservoir Properties Using a Prestack Seismic Probabilistic Inversion in Gas-Bearing Tight Sandstone Reservoirs

Pre‐stack Inversion Combined with Geostatistical Simulation to Predict Thin Reservoirs

Quantitative characterization of tight gas sandstone reservoirs using seismic data via an integrated rock-physics-based framework

WELL-LOG CONSTRAINED INVERSION FOR LITHOLOGY CHARACTERIZATION: A CASE STUDY AT THE JZ25-1 OIL FIELD, CHINA

Fluid Identification Based on NMR Apparent Free Water Porosity Inversion: A Case Study of Paleozoic Tight Sandstone Gas Reservoirs in Western Ordos

Prediction of tight sandstone reservoirs based on waveform indication simulation

Quantitative characterization technique for tight gas reservoir in Groundbirch,Canada

High-resolution isochronous stratigraphic framework through well-seismic integration in tight sandstone: a case study of Luodai gas field, Sichuan, China

Quantitative Prediction of Porosity and Gas Saturation Based on a New Dual-Porosity Rock-Physics Model and Shuey’s Poisson Ratio for Tight Sandstone Reservoirs

Accurate Porosity Prediction for Tight Sandstone Reservoir: A Case Study from North China

Petrofacies Prediction and 3-D Geological Model in Tight Gas Sandstone Reservoirs by Integration of Well Logs and Geostatistical Modeling

Application of the improved seismic AVAZ inversion method for fracture characterization of a tight sandstone gas reservoir in the Ordos Basin

Estimation of porosity and facies distribution through seismic inversion in an unconventional tight sandstone reservoir of Hangjinqi area, Ordos basin