Abstract:Post-drilling wireline acoustic single-well imaging technology can now detect geological structures tens of meters away from boreholes. Further development of this single-well imaging technology in the logging-while-drilling (LWD) environment will have significant values in real-time applications such as geosteering and reservoir navigation. Based on the wireline imaging application, we propose a new method for the LWD application. In wireline imaging, the four-component (4C) dipole acoustic data are azimuthally rotated to scan the reflectors around the borehole. In LWD, azimuthal scanning is achieved by drilling rotation such that the 4C dipole system in the wireline is replaced by a one-dipole-source and two-receiver LWD system, where the two receivers are mounted on opposite sides of the drill collar. For the LWD application, we first developed the theory for LWD dipole shear-wave reflection imaging and validated the theory using 3D finite-difference waveform modeling. Using the analytical solution, we analyzed the far-field radiation directivity of an acoustic LWD dipole source and the effect of drilling rotation on the shear-wave reflection imaging using the LWD acoustic system. The LWD analysis results show that, for fast formations, the SH-wave is the dominant component for imaging, whereas for slow formations, the P-wave becomes important and can be used for imaging. Our results also indicate that the reflection data acquired by the system are affected by the speed of drilling rotation. The take-off azimuth at the wave radiation may be different from the incident azimuth at the wave reception. Knowing the rotation speed, this azimuth difference can be corrected. A further advantage of using the oppositely mounted receivers is that the reflected wave arrives earlier (later) at the front (back)-side receiver; thus, the arrival time difference between the receivers can be used to eliminate the 180°-azimuth ambiguity of dipole acoustic imaging. For reflection imaging, using the proposed LWD system configuration, we tested its azimuth sensitivity and validated its 180°-ambiguity solution using synthetic LWD and field wireline dipole data. The results of this work, therefore, provide a theoretical foundation for the development of the LWD acoustic reflection imaging system.

A Novel Lateral Resistivity Logging-While-drilling (LWD) Method in Oil-Based Drilling Fluid

The Resistivity Imaging LWD Method Suitable for Oil-Based Drilling Fluid

Signal detection of lateral resistivity LWD based on C4D technique with oil-based drilling fluid

A New Logging-While-Drilling Method for Resistivity Measurement in Oil-Based Mud.

Study on Numeric Simulation of Complex Resistivity Logging

Induction Logging Through Casing by Detecting Lateral Waves: A Numerical Analysis

A Novel Approach for Electromagnetic Logging While Drilling Data Processing

Coil optimization of ultra-deep azimuthal electromagnetic resistivity logging while drilling tool based on numerical simulation

Simulation of the Borehole Quasistatic Electric Field Excited by the Acoustic Wave During Logging While Drilling Due to Electrokinetic Effect

Fluid Identification Method of Nuclear Magnetic Resonance and Array Acoustic Logging for Complex Oil and Water Layers in Tight Sandstone Reservoir

Parameter Inversion Based on Levenberg-Marquardt Algorithm for Layered Formation Using Electromagnetic Wave Resistivity Tool

Real-time forward modeling and inversion of logging-while-drilling electromagnetic measurements in horizontal wells

Design and experimental study of a new hydraulic tool for lost-circulation materials (LCM) plugging while drilling

Application of Vector Finite Element Method to Simulat Elogging-While-drilling Resistivity Tools

Experimental studies on the mechanism of seismoelectric logging while drilling with multipole source

Design of a New Acoustic Logging While Drilling Tool

On the Depth of Detection of Logging-While-drilling Resistivity Measurements for Looking-Around and Looking-Ahead Applications

Genetic mechanisms and multi-parameter logging identification of low-resistivity oil pay: A case study of the Triassic Chang 6 member, Zhidan area, Ordos Basin, China

A Hybrid Loop-Tree FEBI Method for Low-Frequency Well Logging of 3-D Structures in Layered Media

A theoretical analysis of the logging-while-drilling dipole acoustic reflection measurement

Development of Online Drilling Fluid Property Logging System