Abstract:Post-drilling wireline acoustic single-well imaging technology can now detect geological structures tens of meters away from boreholes. Further development of this single-well imaging technology in the logging-while-drilling (LWD) environment will have significant values in real-time applications such as geosteering and reservoir navigation. Based on the wireline imaging application, we propose a new method for the LWD application. In wireline imaging, the four-component (4C) dipole acoustic data are azimuthally rotated to scan the reflectors around the borehole. In LWD, azimuthal scanning is achieved by drilling rotation such that the 4C dipole system in the wireline is replaced by a one-dipole-source and two-receiver LWD system, where the two receivers are mounted on opposite sides of the drill collar. For the LWD application, we first developed the theory for LWD dipole shear-wave reflection imaging and validated the theory using 3D finite-difference waveform modeling. Using the analytical solution, we analyzed the far-field radiation directivity of an acoustic LWD dipole source and the effect of drilling rotation on the shear-wave reflection imaging using the LWD acoustic system. The LWD analysis results show that, for fast formations, the SH-wave is the dominant component for imaging, whereas for slow formations, the P-wave becomes important and can be used for imaging. Our results also indicate that the reflection data acquired by the system are affected by the speed of drilling rotation. The take-off azimuth at the wave radiation may be different from the incident azimuth at the wave reception. Knowing the rotation speed, this azimuth difference can be corrected. A further advantage of using the oppositely mounted receivers is that the reflected wave arrives earlier (later) at the front (back)-side receiver; thus, the arrival time difference between the receivers can be used to eliminate the 180°-azimuth ambiguity of dipole acoustic imaging. For reflection imaging, using the proposed LWD system configuration, we tested its azimuth sensitivity and validated its 180°-ambiguity solution using synthetic LWD and field wireline dipole data. The results of this work, therefore, provide a theoretical foundation for the development of the LWD acoustic reflection imaging system.

Acoustic fields for monopole logging while drilling with an eccentric collar

Investigation of the high-frequency wavefield of an off-center monopole acoustic logging-while-drilling tool

Impact of Tool Eccentricity on Acoustic Logging Response in Horizontal Wells: Insights from Physical Simulation Experiments

Wavefield simulation and analysis with the finite-element method for acoustic logging while drilling in horizontal and deviated wells

Simulation of the Borehole Quasistatic Electric Field Excited by the Acoustic Wave During Logging While Drilling Due to Electrokinetic Effect

Sensitivity analysis of S-waves and their velocity measurement in slow formations from monopole acoustic logging-while-drilling

Borehole radiation and reception responses for azimuthal shear-wave reflection imaging with an off-centred dipole acoustic tool

Modeling and Inversions of Acoustic Reflection Logging Imaging Using the Combined Monopole–dipole Measurement Mode

Factors Influencing Radiation Sound Fields in Logging While Drilling Using an Acoustic Dipole Source

Experimental measurements of monopole inner/outer collar waves and estimation of P wave velocity in acoustic LWD

Analytical solutions for dispersions and waveforms of acoustic logging in a cased hole

Numerical Study on the Characteristics of Multipole Acoustic Logging While Drilling in Cracked Porous Medium

Interface Detection of Near-Borehole Stratified Formation under Different Permeabilities Based on Seismoelectric Logs: A Finite-Difference Modeling

A Novel Lateral Resistivity Logging-While-drilling (LWD) Method in Oil-Based Drilling Fluid

Analysis of the Acoustic Wavefields Excited by the Logging-While-Drilling (LWD) Tool

Experimental studies on the mechanism of seismoelectric logging while drilling with multipole source

Detection performance of azimuthal electromagnetic logging while drilling tool in anisotropic media

Inversion of shear wave slowness and attenuation from dipole acoustic logging data based on an equivalent tool theory

A theoretical analysis of the logging-while-drilling dipole acoustic reflection measurement

Design of a New Acoustic Logging While Drilling Tool

Joint inversion of formation radial shear-velocity profiles by dipole acoustic logging while drilling