Abstract:Mixed oxide catalysts yMn–Zr–Ti (y/10/10 with y = 1, 3, 5, 7 and 9) for the selective catalytic reduction (SCR) of NOx with NH3 in the presence of oxygen were synthesized by co-precipitation. The catalyst 5Mn–Zr–Ti exhibited a catalytic activity higher than 87% above 160 °C and N2 selectivity above 92% at 100–300 °C. The SCR performance was quite stable at 180 and 200 °C for 15 h. Mn species are shown to improve the catalytic activity by providing more surface labile oxygen, while a synergistic effect among Mn, Zr and Ti species suppressed the generation of N2O. According to in situ DRIFT analysis, NOx was primarily reduced by the reaction of bidentate nitrate and monodentate nitrito species with adsorbed NH3. Subsequently, a comprehensive reaction mechanism was proposed. Accordingly, the formation of NH species was inhibited, and hence, the N2O formation by the reaction of NH and bidentate nitrate was suppressed. Furthermore, the investigation of the deactivation mechanism by SO2 indicated that both the deposition of ammonium sulfates and the sulfation of Mn active sites resulted in the deactivation of the catalyst 5Mn–Zr–Ti. The deposition of ammonium sulfates at 180 °C was more pronounced than that at 220 °C.

Selective Catalytic Reduction of Nox with Nh3 on A Cr-Mn Mixed Oxide at Low Temperature

Selective Catalytic Reduction of NOX on Cr-Mn Mixed Oxide at Low Temperature

Selective Catalytic Reduction of NO<sub>X</sub> on Cr-Mn Mixed Oxide at Low Temperature

Mnox/Ceo2/Sio2 Catalysts Prepared by Adsorption Phase Reaction Technique for Selective Catalytic Reduction of Nox at Low-Temperature

Preparation of Cr-Mn Mixed Oxide by Coprecipitation and Its Performance for Low-Temperature Selective Catalytic Reduction of NOx

Cr–MnO Mixed-Oxide Catalysts for Selective Catalytic Reduction of NO with NH3 at Low Temperature

Low-Temperature Selective Catalytic Reduction of NOx with NH3 over Novel Mn–Zr Mixed Oxide Catalysts

Low-Temperature Selective Catalytic Reduction of NOx with NH3 over Fe–Mn Mixed-Oxide Catalysts Containing Fe3Mn3O8 Phase

Novel Mnox Catalyst for Low-Temperature Selective Catalytic Reduction of Nox with Nh3

Manganese–niobium Mixed Oxide Catalyst for the Selective Catalytic Reduction of NOx with NH3 at Low Temperatures

Selective catalytic reduction of NOx with NH3 by monolithic catalyst MnOx/AC/C under low temperature in the presence of excess O2

Low-temperature Selective Catalytic Reduction of NO with NH3 over Monolith Catalyst of MnOx/CeO2–ZrO2–Al2O3

Low Temperature Selective Catalytic Reduction of NOx with NH3 over Amorphous MnOx Catalysts Prepared by Three Methods

Low-temperature SCR of NO with NH3 over AC/C Supported Manganese-Based Monolithic Catalysts

Low-temperature selective catalytic reduction of NO with NH3 over MnOx-CeO2/ZrO2-TiO2 monolith catalyst

Selective Catalytic Reduction of NOx with NH3 over Mn-Ce Mixed Oxide Catalyst at Low Temperatures

Low-Temperature Selective Catalytic Reduction of NO with NH_3 over MnO_x-CeO_2/ZrO_2-TiO_2 Monolith Catalyst

Selective Catalytic Reduction Of Nox With Nh3 At Low Temperatures Over Metal Oxide Supported On Ac-C Cellular Monoliths

Sm-MnOx Catalysts for Low-Temperature Selective Catalytic Reduction of NOx with NH3:Effect of Precipitation Agent

Selective Catalytic Reduction of NO with NH3 over Mn-based Catalysts at Low Temperature

Selective catalytic reduction of NOx with NH3 over Mn–Zr–Ti mixed oxide catalysts