Abstract:In bridge structure monitoring and evaluation, deformation data serve as a crucial basis for assessing structural conditions. Different from discrete monitoring points, spatially continuous deformation modes provide a comprehensive understanding of deformation and potential information. Terrestrial laser scanning (TLS) is a three-dimensional deformation monitoring technique that has gained wide attention in recent years, demonstrating its potential in capturing structural deformation models. In this study, a TLS-based bridge deformation mode monitoring method is proposed, and a deformation mode calculation method combining sliding windows and surface fitting is developed, which is called the SWSF method for short. On the basis of the general characteristics of bridge structures, a deformation error model is established for the SWSF method, with a detailed quantitative analysis of each error component. The analysis results show that the deformation monitoring error of the SWSF method consists of four parts, which are related to the selection of the fitting function, the density of point clouds, the noise of point clouds, and the registration accuracy of point clouds. The error caused by point cloud noise is the main error component. Under the condition that the noise level of point clouds is determined, the calculation error of the SWSF method can be significantly reduced by increasing the number of points of point clouds in the sliding window. Then, deformation testing experiments were conducted under different measurement distances, proving that the proposed SWSF method can achieve a deformation monitoring accuracy of up to 0.1 mm. Finally, the proposed deformation mode monitoring method based on TLS and SWSF was tested on a railway bridge with a span of 65 m. The test results showed that in comparison with the commonly used total station method, the proposed method does not require any preset reflective markers, thereby improving the deformation monitoring accuracy from millimeter level to submillimeter level and transforming the discrete measurement point data form into spatially continuous deformation modes. Overall, this study introduces a new method for accurate deformation monitoring of bridges, demonstrating the significant potential for its application in health monitoring and damage diagnosis of bridge structures.

Monitoring of Bridge Deformation Using GPS Technique

Dynamic Monitoring and Data Analysis of a Long-Span Arch Bridge Based on High-Rate GNSS-RTK Measurement Combining CF-CEEMD Method

Analysis of Bridge Movements and Damage Based on GPS Monitoring Technique

Simple Geometrical Model to Analyze the Motion Detection of Bridges Based-Gps Technique: Case Study Yonghe Bridge

GPS Performance Assessment of Cable-Stayed Bridge using Wavelet Transform and Monte-Carlo Techniques

Bridge monitoring using BDS-RTK and GPS-RTK techniques

Sensitivity and analysis GPS signals based bridge damage using GPS observations and wavelet transform

Experimental Research on Daily Deformation Monitoring of Bridge Using BDS/GPS

Application of the Real-Time Kinematic Global Positioning System in Bridge Safety Monitoring

Study For Real-Time Monitoring Of Large-Span Bridge Using Gps

A REMOTE DEFORMATION MONITORING SYSTEM FOR A CABLE-STAYED BRIDGE USING WIRELESS INTERNET-BASED GPS TECHNOLOGY

High-Precision Monitoring Method for Bridge Deformation Measurement and Error analysis Based on Terrestrial Laser Scanning

Data analysis to Real Time Displacement Monitoring of Humen Bridge by GPS(RTK)

Kalman Filter Based Estimation of Neutral Axis Position of Bridge Deck under Traffic Loading

Review of Bridge Structural Health Monitoring Based on GNSS: From Displacement Monitoring to Dynamic Characteristic Identification

Strain-Based Structural Condition Assessment of an Instrumented Arch Bridge Using Fbg Monitoring Data

Deformation monitoring and analysis of a long-span cable-stayed bridge during strong typhoons

Dynamic Triple-difference Method for Single Frequency GPS Deformation Monitoring

Bridge Dynamic Displacement Monitoring Using Adaptive Data Fusion of GNSS and Accelerometer Measurements

Real-time strain monitoring and control of urban bridge cluster monitoring system with FBG sensor

Research on health monitoring of Harbin Sifangtai Bridge in China