Abstract:Pure tungsten (W) is generally believed to be a preferred alternative material for kinetic penetrators once a "self-sharpening" effect can be realized by inducing adiabatic shear failure during high-speed impact. However, it is still a major challenge to trigger adiabatic shear bands (ASBs) in pure W with low ductility. In this work, we reported an improved adiabatic shear susceptibility of pure W by controlling the texture evolution during the pre-rolling process. As the rolling strain increased, the texture components and intensity underwent crucial variations to facilitate the appearance of ASBs. For comparative studies, we investigated the dynamic behavior of three kinds of W samples with different microstructural features at a wide range of temperatures (298K∼1473K) via SHPB system, including coarse-grained W (CGW), as-rolled W samples to the thickness reductions of 75% (75W) and 80% (80W). The experimental results revealed a transition of failure behavior from typical brittle fracture to adiabatic shear instability under uniaxial dynamic compression. Of particular interest was that although 75W and 80W exhibited almost the same mechanical properties after the similar rolling reductions, their dynamic instability behaviors differed remarkably with different spatial distributions of texture components. In the as-rolled 75W, two dominant texture components of {001} and {111} were alternate to form fully spaced layers. Under uniaxial compression, the {111} "hard orientation layers" became the obstacles to the propagation of ASBs. Fortunately, in 80W specimens the different {001} "soft orientation layers" were interconnected by the "soft bricks" of the same orientation, which provided pathways for the expansion of shear localization and ultimately the triggering of ASBs. Through subsequent crystal plasticity finite element (CPFEM) simulations, we further verified the effect of orientation distributions on the shear localization and thoroughly explained the formation mechanism of ASBs in the highly textured refractory metal. This may provide guidance for producing advanced materials for certain practical applications.

Adiabatic Shear Banding in a Tungsten Heavy Alloy Processed by Hot-Hydrostatic Extrusion and Hot Torsion

Influence of Microstructure on Adiabatic Shear Localization of Pre-Twisted Tungsten Heavy Alloys

High susceptibility to adiabatic shear banding and high dynamic strength in tungsten heavy alloys with a high-entropy alloy matrix

FORMATION MECHENISM OF ADIABATIC SHEAR BAND IN TUNGSTEN HEAVY ALLOYS

Influence of Stress Condition on Adiabatic Shear Localization of Tungsten Heavy Alloys

Tailoring the adiabatic shear susceptibility of pure tungsten via texture evolution

The W alloying effect on thermal stability and hardening of nanostructured Cu-W alloyed thin films

Electron Beam Welding and Post Heat Treatment of a New Near-Beta High-Strength Ti-4Al-5Mo-5V-5Cr-1Nb Alloy

Adiabatic shearing localization of tungsten heavy alloy

Tensile Behaviors of Rolled and Annealed 90w7ni3fe Alloy

Mechanical Behavior and Dynamic Failure of High-Strength Ultrafine Grained Tungsten under Uniaxial Compression

The Thermal-Mechanical Behavior of WTaMoNb High-Entropy Alloy Via Selective Laser Melting (SLM): Experiment and Simulation

High Entropy Component-Induced Nanoscale Shear Banding and Twinning Enhance Ti6al4v Alloy Surface Properties

Microstructural Characteristics and Formation Mechanism of Adiabatic Shear Bands in Al–Zn–Mg–Cu Alloy under Dynamic Shear Loading

Abnormal hardening and amorphization in an FCC high entropy alloy under extreme uniaxial tension

Experimental and numerical study on the dynamic shear banding mechanism of HfNbZrTi high entropy alloy

Effect of High Strain Rate on Adiabatic Shearing of α+β Dual-Phase Ti Alloy

Influence of Hot Extrusion on Microstructure and Mechanical Properties of Tungsten Based Heavy Alloy

Effect of High Strain Rate on Adiabatic Shear Susceptibility and Microstructures in Al0.4CoCrFeNi High-Entropy Alloy

Concurrent Hardening and Toughening of a Tungsten Heavy Alloy via a Novel Carburizing Cyclic Heat Treatment

Extremely uniform nanosized oxide particles dispersion strengthened tungsten alloy with high tensile and compressive strengths fabricated involving liquid-liquid method