Abstract:Pure tungsten (W) is generally believed to be a preferred alternative material for kinetic penetrators once a "self-sharpening" effect can be realized by inducing adiabatic shear failure during high-speed impact. However, it is still a major challenge to trigger adiabatic shear bands (ASBs) in pure W with low ductility. In this work, we reported an improved adiabatic shear susceptibility of pure W by controlling the texture evolution during the pre-rolling process. As the rolling strain increased, the texture components and intensity underwent crucial variations to facilitate the appearance of ASBs. For comparative studies, we investigated the dynamic behavior of three kinds of W samples with different microstructural features at a wide range of temperatures (298K∼1473K) via SHPB system, including coarse-grained W (CGW), as-rolled W samples to the thickness reductions of 75% (75W) and 80% (80W). The experimental results revealed a transition of failure behavior from typical brittle fracture to adiabatic shear instability under uniaxial dynamic compression. Of particular interest was that although 75W and 80W exhibited almost the same mechanical properties after the similar rolling reductions, their dynamic instability behaviors differed remarkably with different spatial distributions of texture components. In the as-rolled 75W, two dominant texture components of {001} and {111} were alternate to form fully spaced layers. Under uniaxial compression, the {111} "hard orientation layers" became the obstacles to the propagation of ASBs. Fortunately, in 80W specimens the different {001} "soft orientation layers" were interconnected by the "soft bricks" of the same orientation, which provided pathways for the expansion of shear localization and ultimately the triggering of ASBs. Through subsequent crystal plasticity finite element (CPFEM) simulations, we further verified the effect of orientation distributions on the shear localization and thoroughly explained the formation mechanism of ASBs in the highly textured refractory metal. This may provide guidance for producing advanced materials for certain practical applications.

Adiabatic shearing localization of tungsten heavy alloy

Influence of Stress Condition on Adiabatic Shear Localization of Tungsten Heavy Alloys

Influence of Microstructure on Adiabatic Shear Localization of Pre-Twisted Tungsten Heavy Alloys

FORMATION MECHENISM OF ADIABATIC SHEAR BAND IN TUNGSTEN HEAVY ALLOYS

Instability Analysis and Rate-Dependent Failure Criteria for Adiabatic Shear Band Propagation of Ti-6al-4v

Shear localization behavior in hat-shaped specimen of near-α Ti−6Al−2Zr−1Mo−1V titanium alloy loaded at high strain rate

Adiabatic Shear Localization in Nanostructured Face Centered Cubic Metals under Uniaxial Compression

Shear Localization of 7055 Aluminum Alloy under Dynamic Compression

Plastic Flow Localization in Bulk-Tungsten with Ultrafine Microstructure

Mechanical Behavior and Dynamic Failure of High-Strength Ultrafine Grained Tungsten under Uniaxial Compression

Shear localization in metallic materials at high strain rates

Microstructural evolution in adiabatic shear localization in Al0.4CoCrFeNi high-entropy alloy

Tailoring the adiabatic shear susceptibility of pure tungsten via texture evolution

Microstructural Evolution of Shear Localization in High-Speed Cutting of CoCrFeMnNi High-Entropy Alloy

Effect of High Strain Rate on Adiabatic Shearing of α+β Dual-Phase Ti Alloy

Multi-scale coupling effects on flow localization during micro-compression deformation of Ti–6Al–4V alloy

The Effects of Microstructure on the Dynamic Mechanical Response and Adiabatic Shearing Behaviors of a Near-α Ti-6Al-3Nb-2Zr-1Mo Alloy

Adiabatic Shearing Failure Mechanism of Aluminum Matrix Composites

Multi-scale crystal plasticity finite element simulations of the microstructural evolution and formation mechanism of adiabatic shear bands in dual-phase Ti20C alloy under complex dynamic loading

Examining deformation localization of irradiated tungsten under uniaxial compression with crystal plasticity

Adiabatic shear failure of high reinforcement content aluminum matrix composites