Abstract:Pure tungsten (W) is generally believed to be a preferred alternative material for kinetic penetrators once a "self-sharpening" effect can be realized by inducing adiabatic shear failure during high-speed impact. However, it is still a major challenge to trigger adiabatic shear bands (ASBs) in pure W with low ductility. In this work, we reported an improved adiabatic shear susceptibility of pure W by controlling the texture evolution during the pre-rolling process. As the rolling strain increased, the texture components and intensity underwent crucial variations to facilitate the appearance of ASBs. For comparative studies, we investigated the dynamic behavior of three kinds of W samples with different microstructural features at a wide range of temperatures (298K∼1473K) via SHPB system, including coarse-grained W (CGW), as-rolled W samples to the thickness reductions of 75% (75W) and 80% (80W). The experimental results revealed a transition of failure behavior from typical brittle fracture to adiabatic shear instability under uniaxial dynamic compression. Of particular interest was that although 75W and 80W exhibited almost the same mechanical properties after the similar rolling reductions, their dynamic instability behaviors differed remarkably with different spatial distributions of texture components. In the as-rolled 75W, two dominant texture components of {001} and {111} were alternate to form fully spaced layers. Under uniaxial compression, the {111} "hard orientation layers" became the obstacles to the propagation of ASBs. Fortunately, in 80W specimens the different {001} "soft orientation layers" were interconnected by the "soft bricks" of the same orientation, which provided pathways for the expansion of shear localization and ultimately the triggering of ASBs. Through subsequent crystal plasticity finite element (CPFEM) simulations, we further verified the effect of orientation distributions on the shear localization and thoroughly explained the formation mechanism of ASBs in the highly textured refractory metal. This may provide guidance for producing advanced materials for certain practical applications.

Influence of Stress Condition on Adiabatic Shear Localization of Tungsten Heavy Alloys

The Influence of Crystal Defects on the Elastic Properties of Tungsten Metals

Instability Analysis and Rate-Dependent Failure Criteria for Adiabatic Shear Band Propagation of Ti-6al-4v

Tailoring the adiabatic shear susceptibility of pure tungsten via texture evolution

Mechanical properties and JC constitutive modification of tungsten alloys under high strain rates and high/low temperatures

Shear localization behavior in hat-shaped specimen of near-α Ti−6Al−2Zr−1Mo−1V titanium alloy loaded at high strain rate

Renal transplantation in children younger than 6 years old.

Examining deformation localization of irradiated tungsten under uniaxial compression with crystal plasticity

Adiabatic Shear Localization in Metallic Materials: Review

Temperature Dependent Deformation Localization in Irradiated Tungsten

Stress-Strain Distribution Within Rotary Swaged Tungsten Heavy Alloy

Effect of High Strain Rate on Adiabatic Shearing of α+β Dual-Phase Ti Alloy

Influence of Loading Orientation on Deformation Localization of Irradiated Tungsten

Effect of Strain Rate and Temperature on Dynamic Mechanical Behavior and Microstructure Evolution of Ultra-High Strength Aluminum Alloy

Shear localization in metallic materials at high strain rates

Adiabatic Shear Localization in Nanostructured Face Centered Cubic Metals under Uniaxial Compression

The Effects of Microstructure on the Dynamic Mechanical Response and Adiabatic Shearing Behaviors of a Near-α Ti-6Al-3Nb-2Zr-1Mo Alloy

Defining Population Health Management: A Scoping Review of the Literature.

Dislocation-mediated Strain Hardening in Tungsten: Thermo-mechanical Plasticity Theory and Experimental Validation

Microstructural evolution in adiabatic shear localization in Al0.4CoCrFeNi high-entropy alloy

Strain hardening rate and strain rate sensitivity behavior of bcc/fcc-dual-phase tungsten heavy alloy