Abstract:As one of Mn+1AXn (MAX) family, where M is an early transition metal, A is an A-group element, and X is either C or N and n = 1, 2, and 3, Ti2AlC is a promising candidate material for nuclear energy industry due to its unique features such as elastically stiff, good electrical conductivity, high thermal conductivity and excellent resistance to high temperature oxidation and corrosion. However, the mechanical and thermal properties of Ti2AlC compound are expected to be improved. For the first time, the effect of V content on the structural, elastic, electronic and thermodynamic properties of the (Ti1-xVx)2AlC (x = 0, 0.25, 0.50, 0.75 and 1.00) solid solutions was examined systematically and their compression behavior under 50 GPa was studied using density functional theory (DFT). The optimized lattice constants agree well with the experimental values and decrease with the increase of V content. The (Ti1-xVx)2AlC solid solutions are compressible along both a and c directions in the pressure range of 0–50 GPa. Calculated elastic constants verified mechanical stability under 50 GPa. The constant C 44 , directly related to the valence electron concentration, is found to increase with increasing V content. The bulk modulus, shear modulus, Young's modulus and Vickers hardness are found to reach a significant maximum value respectively when V content is 75%, and the reason is studied. The shear anisotropy factors show that (Ti1-xVx)2AlC compounds containing Ti and V are more anisotropic than Ti2AlC, and they have a tendency towards improved ductility. The metallic behaviors of (Ti1-xVx)2AlC solid solutions are confirmed by analyzing the electronic band structures and density of states. The thermal properties imply that the (Ti0.25V0.75)2AlC is expected to be more thermally conductive due to its highest Debye temperature of 771K of the five compounds. In addition, the bulk modulus, shear modulus, Young's modulus and Debye temperature increase with the increase of pressure under 50 GPa. The results reveal that the mechanical properties of Ti2AlC are improved much better than the thermal properties by the inclusion of V. Especially, the (Ti0.25V0.75)2AlC MAX phase in (Ti1-xVx)2AlC solid solutions is probably the most suitable candidate material for mechanical and thermal applications at high temperature.

Synthesis and Elastic Properties of V2alc Thin Films by Magnetron Sputtering from Elemental Targets

Growth and thermal stability of (V,Al)2Cx thin films

Synthesis of Cr2AlC Thin Films by Reactive Magnetron Sputtering

In Situ Reaction Synthesis And Mechanical Properties Of V2alc

<i>In Situ</i>Reaction Synthesis and Mechanical Properties of V<sub>2</sub>AlC

Phase composition and transformations in magnetron-sputtered (Al,V)2O3 coatings

Deposition and Characterization of Ti2AlC MAX Phase and Ti3AlC Thin Films by Magnetron Sputtering

Deposition of Tungsten-Doped V2O5 Thin Films on Non-Alkali Glass Substrate by RF Magnetron Sputtering for Thermal Insulation

Screen the elastic and thermodynamic properties of MAX solid solution using DFT procedue: Case study on (Ti1-xVx)2AlC

Yttrium incorporation in Cr2AlC: On the metastable phase formation and decomposition of (Cr,Y)2AlC MAX phase thin films

Interfacial Structure of V2AlC Thin Films Deposited on (112¯0)

Tuning metal-insulator transitions in epitaxial V$_2$O$_3$ thin films

The Influence of Cr Content on the Phase Structure of the Al-rich Al-Cr-O Films Deposited by Magnetron Sputtering at Low Temperature

Effects of phase transition on tribological properties of amorphous VAlTiCrSi high-entropy alloy film by magnetron sputtering

Synthesis, microstructure and properties of MoAlB MAB phase films

The effect of magnetism and temperature on the stability of Cr, V, Al carbide MAX phases

Fabrication of Cr2AlC Coating from the Cost-Efficient Cr-Al-C Target by Arc Ion Plating

Low-temperature Deposition of Al-rich Α-(Al, Cr)2O3 Films by Sputtering AlxCr95-x(α-Al2O3)5 Targets

The influences of vanadium addition and temperature on the microstructure, and mechanical properties of Al 0.1 CoCrFeNiV x multi-principal element alloys

Fabrication of Cr2AlB2 and Cr4AlB4 MAB Phase Coatings by Magnetron Sputtering and Post-Annealing

Influence of Substrate Temperature on Structural Properties and Deposition Rate of AlN Thin Film Deposited by Reactive Magnetron Sputtering