Abstract:Polymer-modified bentonite is widely utilized in wastewater treatments and barrier projects for contaminants due to its excellent performance. Despite numerous studies being conducted on the properties of different types of polymer-modified bentonite, the impact of synthetic processes has not been systematically explored. Hence, two common processes, the wet process and the semi-dry process, were investigated and compared. Sodium carboxymethyl cellulose (CMC)-modified bentonite was selected as an example here. Response surface methodology (RSM) was employed to develop relationship models of various factors versus the swell index. Specifically, the influence of modification temperature and stirring duration in the wet process, as well as pressure, moisture content, and ageing time in the semi-dry process were investigated. The feasibility and accuracy of the models were verified by the analysis of variance (ANOVA) and hypothesis testing. Results indicate that the semi-dry process leads to greater expansibility than the wet process. CMC dosage is a critical factor affecting performance. The following recommendations were made for the practical production: for the wet process, long-duration stirring at high temperature should be avoided at low CMC dosage, while the opposite is true at high CMC dosage (> 10%); for the semi-dry process, a longer ageing period should be selected at higher polymer contents, which can obviously improve the performance. Microscopic experiments were conducted to compare the differences in the modification mechanism of the two processes. Polymer/bentonite composites mainly form co-existing exfoliated and intercalated structures in wet and semi-dry processes, and the latter has a higher degree of exfoliation. The intensity of cationic bridging, hydrogen bonding, and group interaction between the polymer and bentonite is stronger when adopting the semi-dry process, resulting in better modification effects.

Experimental researches on the modified bentonite treatment of emulsion wastewater

Advances in Research on Treatment of Oil Field Wastewater Using Bentonite

Phenol adsorption properties and microstructural changes of organically modified bentonite

A new method for the preparation of modified bentonite used in organic wastewater treatment

An experimental study of the treatment of biorefractory landfill leachate by combination of natural bentonite and modified bentonite

Recycling Paper Mill Sludge with Modified Bentonite

Emulsion Wastewater Treatment with Microwave Irradiation Technology

Study on Bentonite Modified by Microwave and Adsorption of Methyl Orange in Wastewater

Study on Catalytic Oxidation, Flocculation and Sedimentation of Acidizing and Fracturing Wastewater

Study on Resin Modified by Quaternary Ammonium Salt for Emulsified Oil Wastewater Treatment

Research on experiment and technology of emulsion liquid membrane applied to H acid wastewater treatment

Study on mechanisms of oil biodegradation in water enhanced by modified bentonite

Efficient treatment of emulsified oily wastewater by using amphipathic chitosan-based flocculant

Diatomite Precoating Filtration Of Micropolluted Water By Combination With Bentonite Adsorption Process

Enhanced Effect of Cetyl Pyridinium Chloride in Bentonites Treatment of Waste Water Containing P-Nitrophenol

Study on Absorption Sulfide in Wastewater by Modified Bentonite and its Regeneration

Emulsified Oil Wastewater Treatment with Modified Resin and Its Demulsification Mechanism

Study on Wastewater Demulsification Technology of Crude Oil in Xinjiang Oilfield

Treatment of Municipal Landfill Leachate with Organically Modified Bentonite

Effects of Synthetic Processes on the Swelling Capacity and Modification Mechanism of CMC-modified Bentonite Composites

Preparation and Mechanism of a New Enhanced Flocculant Based on Bentonite for Drinking Water