Abstract:Novel multifunctional adsorbent bentonite-steel slag composite particles (BSC) were developed for highly efficient and synergistic treatment of heavy metal ions in acid mine drainage (AMD). Single-factor experiments were performed to examine the influence of different parameters on the adsorption effect, alkalinity release quantity, and loss rate of the composite particles. Based on these results, an L9(4(3)) orthogonal experiment was carried out, and the optimum levels and order of the factors were determined by range analysis. Finally, the optimum preparation process of the composite particles was determined: a bentonite-steel slag proportion of 5:5, Na2CO3 content of 5%, aging time of 12 h, calcination particle size of 2 mm, calcination temperature of 500 degrees C, and calcination time of 60 min. The isothermal adsorption of optimum BSC fit well with Langmuir and Brunauer-Emmett-Teller (BET) isotherms ((RR2)-R-2 > 0.997). A synergistic adsorption-coagulation effect occurs, leading to the appearance of multiple layers locally on the surface of BSC, which satisfies the BET model. To understand the preparation mechanism of the BSC, bentonite, steel slag, uncalcined BSC, and the optimum BSC were characterized using scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET) surface area analysis, X-ray powder diffraction (XRD), and Fourier-transform infrared spectroscopy (FTIR). The results indicate that calcination led to an increase in the average pore radius, total pore volume, and specific surface area (S-BET) in the optimum BSC; numerous pores were present on its layered surface. Although the layer spacing increased after calcination, the structure of the dioctahedra remained unchanged. Exchangeable Na+, montmorillonite, and alkaline components were present between the optimum BSC layers. Water and impurities were removed after calcination. The BSC not only released an alkalinity-neutralising acid but also induced a synergistic adsorption-coagulation effect that removed heavy metal ions. It is an excellent multifunctional protective material for the mining environment, that can treat AMD-containing heavy metal ions.

Preparation and Mechanism of a New Enhanced Flocculant Based on Bentonite for Drinking Water

Efficient Treatment of the Starch Wastewater by Enhanced Flocculation–coagulation of Environmentally Benign Materials

Characterization and performance of novel carbon-doped aluminum-modified bentonite for cost-effective fluoride removal

Diatomite Precoating Filtration Of Micropolluted Water By Combination With Bentonite Adsorption Process

Preparation and Coagulation Behavior of a Novel Multiple Flocculant Based on Cationic Polymer, Hydroxy Aluminum, and Clay Minerals

Preparation of Nano Magnetic Modified Bentonite Materials for Reclamation of Coking Wastewater

Synergistic function of bentonite, poly-aluminum chloride, and cationic polyacrylamide to realize highly efficient coagulation-flocculation process for leachate treatment

Preparation of a Novel Bentonite Intercalation Composite by Changing the Chemical State of Aluminum

Efficient Treatment of the Sweet Potato Starch Wastewater by Enhanced Flocculation–Coagulation of Environmentally Benign Materials

Synthesis and characterization of carbon/bentonite composite

Experimental Study On The Optimum Preparation Of Bentonite-Steel Slag Composite Particles

A Kaolinite-Based Design of Kaolin/tio2–pam Composite Flocculant and the Application of the Oil Sand Tailings Flocculant

Preparation of a Lignin-Based Cationic Flocculant and Its Application in Kaolin Suspension Treatment

STUDY ON THE COMPOSITE DEFLOCCULATES OF BENTONITE SUSPENSIONS

Preparation of a graft modified flocculant based on chitosan by ultrasonic initiation and its synergistic effect with kaolin for the improvement of acid blue 83 (AB 83) removal

Preparation and Characterization of Poly Sodium Acrylate/bentonite with Anion-Exchange Function Composite

Synthesis and Characterization of Modified Kaolin-Bentonite Composites for Enhanced Fluoride Removal from Drinking Water

Synthesis and characterization of bentonite based inorgano–organo-composites and their performances for removing arsenic from water

Preparation and application of polymerized aluminum ferrum chloride with bauxite

Preparation of a Novel Inorganic-Biological Composite Flocculant for the Removal of Turbidity and Organic Matter in the Surface Water

Effect of modified bentonite on slime dehydration