Abstract:PO4(3-) and SiO3(2-) are often used as modifier to improve stability and aggregating ability of the iron-base coagulants, however, there are few reports about their detailed comparison between the coagulation performance and mechanisms. In this study, three coagulants--polyferric phosphoric sulfate (PFPS), polysilicon ferric sulfate (PFSS), and polyferric sulfate (PFS) were synthesized; their structure and morphology were characterized by Fourier transformed infrared (FT-IR) spectroscopy, X-ray diffraction (XRD) and Scanning electron microscope (SEM). Alkali titration and Ferron species analysis were employed to investigate the hydrolysis performance and species distribution. Jar test was conducted to measure their coagulation behaviors at different dosage, pH, and temperatures in which the flocs properties were measured. The results showed that a number of new compounds were formed due to the presence of PO4(3-) and SiO3(2-). Moreover, PFPS and PFSS had similar level in Fea as well as Feb. Among them, PFPS produced more multi-core iron atoms polymer and content of Feb, and the formed flocs were larger and denser. It exhibited superior coagulation performance in terms of turbidity reduction, UV254 removal and residual ferric concentration. Jar test and floc breakage/regrowth experiments indicated other than charge neutrality, the dominated mechanism involved in PFSS was the adsorption between polysilicic acid and solution particle, while PFPS was sweeping, entrapment/adsorption resulting from larger polymer colloid of Fe-P chemistry bond.

PROBING INTO THE MECHANISM OF COMPOSITE POLYALUMINUM SILICATE FLOCCULANTS WITH ION-EXCHANGE TECHNIQUE

Humic acid removal from water with polyaluminum coagulants: Effect of sulfate on aluminum polymerization

Characterization and coagulation–flocculation performance of a composite coagulant: poly-ferric-aluminum-silicate-sulfate

Physicochemical characterization and flocculation performance evaluation of PAC / PMAPTAC composite flocculant

Novel ferromagnetic nanoparticle composited PACls and their coagulation characteristics.

Preparation and coagulation-flocculation performance of covalently bound organic hybrid coagulant with excellent stability

Species distribution and coagulation behavior of covalent bonded aluminum-silicon hybrid flocculants

Chemical characteristics of aluminum aqueous solution and the formation mechanism of aluminum polymer

Enhanced Coagulation-Flocculation Performance of Iron-Based Coagulants: Effects of PO4(3-) and SiO3(2-) Modifiers

Study on the Performance of a Novel Inorganic Polymeric Flocculant

Polymerization mechanism of polyferric aluminum phosphatic sulfate (PFAPS) and its flocculation effect on simulated dye wastewater

Research on the preparation of composite polysilicic acid flocculants and their performances

Characterization of Flocs Generated by Preformed and in Situ Formed Al13 Polymer

A novel preparation method of polyaluminum chloride/polyacrylamide composite coagulant: Composition and characteristic

Study on the Coagulation of Polyaluminum Silicate Chloride(PASC)in Water Treatment

Preparation and Characteristics of Polyaluminium Chloride by Utilizing Fluorine-Containing Waste Acidic Mother Liquid from Clay-Brine Synthetic Cryolite Process

Influence of floc size and structure on membrane fouling in coagulation-ultrafiltration hybrid process--the role of Al13 species

Alkalinity Effect of Coagulation with Polyaluminum Chlorides: Role of Electrostatic Patch

Evaluation of the Flocculation Performance of Carboxymethyl Chitosan-Graft-polyacrylamide, a Novel Amphoteric Chemically Bonded Composite Flocculant

Preparation and Applications of Inorganic Polymer Flocculant Poly Aluminum Ferric Sulfate

[Coagulation performance and mechanism of Alb species in polyaluminum chloride in removing humic acid].