Abstract:A rapid and variable-volume sample loading scheme for chip-based sieving electrophoresis was developed by negative pressure combined with electrokinetic force. This was achieved by using a low-cost microvacuum pump and a single potential supply at a constant voltage. Both 12% linear polyacrylamide (LPA) with a high viscosity of 15000 cP and 2% hydroxyethylcellulose (HEC) with a low viscosity of 102 cP were chosen as the sieving materials to study the behavior and the versatility of the proposed method. To reduce the hydrodynamic resistance in the sampling channel, sieving material was only filled in the separation channel between the buffer waste reservoir (BW) to the edge of the crossed intersection. By applying a subambient pressure to the headspace of sample waste reservoir (SW), sample and buffer solution were drawn immediately from sample reservoir (S) and buffer reservoir (B) across the intersection to SW. At the same time, the charged sample in the sample flow was driven across the interface between the sample flow and the sieving matrix into the sieving material filled separation channel by the applied electric field. The injected sample plug length is in proportion with the loading time. Once the vacuum in SW reservoir was released to activate electrophoretic separation, flows from S and B to SW were immediately terminated by the back flow induced by the difference of the liquid levels in the reservoirs to prevent sample leakage during the separation stage. The sample consumption was about 1.7 x 10(2) nL at a loading time of 1 s for each cycle. Only 0.024 s was required to transport bias-free analyte to the injection point. It is easy to freely choose the sample plug volume in this method by simply changing the loading time and to inject high quality sample plug with non-distorted shape into the separation channel. The system has been proved to possess an exciting potential for improving throughput, repeatability, sensitivity and separation performance of chip-based sieving electrophoresis.

Further Improvement of Hydrostatic Pressure Sample Injection for Microchip Electrophoresis

Improved hydrostatic pressure sample injection by tilting the microchip towards the disposable miniaturized CE device.

Negative Pressure Pinched Sample Injection for Microchip-Based Electrophoresis.

Double-cross hydrostatic pressure sample injection for chip CE: variable sample plug volume and minimum number of electrodes.

Numerical analysis of an electrokinetic double-focusing injection technique for microchip CE.

Flow Stabilizer on a Syringe Tip for Hand-Powered Microfluidic Sample Injection

A SANDWICH-INJECTION METHOD FOR MICROCHIP ELECTROPHORESIS

Improvements on the electrokinetic injection technique for microfluidic chips

Improving hydrodynamic injection in capillary electrophoresis by using the integral of pressure

A Microchip Device to Enhance Free Flow Electrophoresis Using Controllable Pinched Sample Injections

Microfabrication of Integrated Capillary Electrophoresis Chips and On-chip Sample Injection and Separation

Optimized Design about Microchannel Shape of Sample Injection on Microchip Electrophoresis

A Pressure-Driven Capillary Electrophoretic System with Injection Valve Sampling.

Acupuncture injection for field amplified sample stacking and glass microchip-based capillary gel electrophoresis

Parallel Separation of Multiple Samples with Negative Pressure Sample Injection on A 3-D Microfluidic Array Chip

Elimination of suction effect in interfacing microchip electrophoresis with inductively coupled plasma mass spectrometry using porous monolithic plugs.

Rapid and Variable-Volume Sample Loading in Sieving Electrophoresis Microchips Using Negative Pressure Combined with Electrokinetic Force.

A High-Throughput Continuous Sample Introduction Interface for Microfluidic Chip-Based Capillary Electrophoresis Systems.

Sequential injection sample introduction microfluidic-chip based capillary electrophoresis system

Simulation And Optimization Of Parameters For Electrophoresis Microchip Design And Operations And Its Validation By Experiments

Accurate And Highly Reproducible Picoliter Injection System For Capillary Electrophoresis