Abstract:Heterogeneous iron/persulfate system suffers from the problems of high ion leaching, severe catalyst surface corrosion and low performance stability. Herein, a series of iron compound incorporated N doped biochar composite catalysts were prepared from pyrolyzing wood powder and ferric ferrocyanide mixture, which were used for bisphenol A (BPA) degradation in water through peroxymonosulfate (PMS) activation. It was found that the reducing gases released from wood powder at different pyrolysis temperature significantly affected the crystalline phase of the iron compound in the catalyst, in which pure phase iron carbide (Fe3C) decorated N doped biochar was obtained at pyrolysis temperature of 600 °C or higher. Wood powder was introduced as both Fe3C formation inductive agent and biochar precursor. Fe3C/biochar exhibited optimal BPA degradation performance, in which 0.5 g/L of catalyst could completely degrade 0.05 mM BPA within 30 min. Radical, high valent iron-oxo, and non-radical species were all generated in the reaction system by both Fe3C and N doped biochar, respectively. Moreover, the multi-valence nature of Fe in Fe3C enabled the reaction system with remarkably reduced Fe ion leaching and negligible iron sludge production since Fe3C could activate PMS through a heterogeneous mechanism. Having multiple active species generated for BPA degradation, the prepared catalyst also showed promising adaptability and recyclability. This study can provide a new solution for the design of iron based catalyst/PMS system for organic pollutant degradations with low ion release.

Research on Iron Catalyst by the Direct Liquefaction of Paulownia in Water

Experimental Research on the Direct Liquefaction of Paulownia in Water to Make Bio-oil

One-Pot Synthesis of Pyrite Nanoplates Supported on Chitosan Hydrochar As Fenton Catalysts for Organics Removal from Water

Infrared Spectrum Analysis of the Direct Catalytic Liquefaction Products of Paulownia

Green and Simple Method for Preparing Iron Oxide Nanoparticles Supported on Mesoporous Biochar As a Fenton Catalyst

Iron-based Metal-Organic Framework Derived Pyrolytic Materials for Effective Fenton-like Catalysis: Performance, Mechanisms and Practicability

Liquefaction of Waste Rendering Fat Using Iron Containing Catalysts

Synergistic Effects Of Metallic Fe And Other Homogeneous/Heterogeneous Catalysts In Hydrothermal Liquefaction Of Woody Biomass

A Combined Experimental and Theoretical Study on the Mechanism of Catalytic Oxidation of Lignite to Carboxylic Acids by Iron

Oxidative Lignin Depolymerization Using Metal Supported Hydrotalcite Catalysts: Effects of Process Parameters on Phenolic Compounds Distribution

Heterogeneous Fenton water purification catalyzed by iron phosphide (FeP)

EFFECT OF IRON CATALYST ON PRODUCT COMPOSITION AND NATURE FOR COAL/OIL CO-PROCESSING

Phosphoric Acid Catalyzed Liquefaction of Acacia Mangium Bark and Resinification of Liquefied Products

In Situ Induction of Strain in Iron Phosphide (fep2) Catalyst for Enhanced Hydroxide Adsorption and Water Oxidation

Wood induced preparation of Fe3C decorated biochar for peroxymonosulfate activation towards bisphenol a degradation with low ion leaching

Synthesis of single-crystal dendritic iron hydroxyl phosphate as a Fenton catalyst

Effects of Catalyst Phase on the Hydrogen Evolution Reaction of Water Splitting: Preparation of Phase-Pure Films of FeP, Fe2P, and Fe3P and Their Relative Catalytic Activities

Hydrothermal liquefaction of lignocellulosic biomass with potassium phosphate and iron and their binary mixture: A comprehensive investigation on the yields and compositions of biocrude and solid residue

Iron Oxide Coating Fenton-like Catalysts: Preparation and Degradation of Phenol

Mechanistic insights into catalysis of in-situ iron on pyrolysis of waste printed circuit boards: Comparative study of kinetics, products, and reaction mechanism

Direct Liquefaction of Coal Using Ferric-Sulfide-Based, Mixed-Metal Catalysts Containing Mg or Mo