Abstract:Today, new energy sources alternative to fossil fuels are needed to meet the increasing energy demand. It is becoming increasingly important to constitute new energy sources from waste biomass through the liquefaction process. In this study, walnut shells (WS) were liquefied catalytically and non-catalytically under different parameters using the liquefaction method. In this process, the effect of silica fume/nano zero-valent iron (SF/NZVI) catalysts on the conversion rates was investigated. The catalyst was synthesized by reducing NZVI using a liquid phase chemical reduction method on SF. The SF/NZVI catalyst was characterized by scanning electron microscopy- energy dispersive X-ray (SEM–EDX), transmission electron microscope (TEM), Brunauer–Emmett–Teller (BET), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) analysis. The effect of various process parameters on the liquefaction process was investigated. In this context, the reaction temperature ranged from 300 to 400 °C, the solid/solvent ratio ranged from 1/1 to 1/3, the reaction time ranged from 30 to 90 min, and the catalyst concentration ranged from 1 to 6%. According to the results obtained, the most suitable operating conditions for non-catalytic experiments in liquefaction of WS were found to be temperature of 400 °C, reaction time of 60 min, and solid/solvent of 1/3. In catalytic conditions, the optimum values were obtained as temperature of 375 °C, reaction time of 60 min, solid/solvent ratio of 1/3, and catalyst concentration of 6%. The highest total conversion and (oil + gas) % conversion were 90.4% and 46.7% under non-catalytic conditions and 90.7% and 62.3% under catalytic conditions, respectively. Gas chromatography/mass spectrometry (GC/MS) analysis revealed the bio-oil was mainly composed of aromatic compounds (benzene, butyl-, indane and their derivatives,) and polyaromatic compounds (naphthalene, decahydro-, cis-, naphthalene, 1-methyl-.). The aim of increasing the quantity and quality of the light liquid product in the study has been achieved.

Liquefaction of Waste Rendering Fat Using Iron Containing Catalysts

Catalytic solvothermal liquefaction of kitchen waste over iron-based catalysts addition and two-step method to produce high-quality fuels

Experimental Studies of Hydrothermal Liquefaction of Kitchen Waste with H+, OH− and Fe3+ Additives for Bio-Oil Upgrading

Experimental studies of hydrothermal liquefaction of kitchen waste with H<sup>+</sup>, OH<sup>−</sup> and Fe<sup>3+</sup> additives for bio-oil upgrading

Reclamation Of Acid Pickling Waste: Preparation Of Nano Alpha-Fe2o3 And Its Catalytic Performance

Catalytic aquathermolysis of contaminated polyolefin plastic waste over an in situ iron hydroxide/oxide nanocatalyst derived from an oil-soluble iron precursor

Catalytic hydrothermal liquefaction of food waste: Influence of catalysts on bio-crude yield, asphaltenes, and pentane soluble fractions

Carbonaceous materials from a petrol primary oily sludge: Synthesis and catalytic performance in the wet air oxidation of a spent caustic effluent

Utilization of iron fillings solid waste for optimum biodiesel production

Synthesis of an ınnovative SF/NZVI catalyst and ınvestigation of its effectiveness on bio-oil production in liquefaction process alongside other parameters

Selective depolymerization of sugarcane bagasse anaerobic digestate to highly stable phenols-rich bio-oil with the iron-doped K-feldspar catalyst

Application of waste iron in wet flue gas desulfurization (WFGD) wastewater treatment

Effect of Water on the Ethanolysis of Waste Cooking Soybean Oil Using a Tin(II) Chloride Catalyst

Synergistic Effects Of Metallic Fe And Other Homogeneous/Heterogeneous Catalysts In Hydrothermal Liquefaction Of Woody Biomass

Chemical reactions of oily sludge catalyzed by iron oxide under supercritical water gasification condition

Catalytic conversion of residual raw material into biodiesel using a superior magnetic solid acid catalyst based on Zn-Fe ferrite: thermodynamic and kinetic studies

Effect of ferrite doped sludge-based catalysts on methane production in anaerobic digestion of organic solid waste

Ferric Oxide Stimulates Medium-Chain Carboxylic Acids Synthesis from Waste Activated Sludge Via Ethanol-Driven Chain Elongation: Mechanisms and Implications

Enhanced aquathermolysis of heavy oil catalysed by bentonite supported Fe(III) complex in the present of ethanol

Polypropylene and rendering fat degrading to value-added chemicals by direct liquefaction and fast-pyrolysis

Bidirectional Catalysis Disintegration and Mineral Polymerization via Endogenous Iron(III) from Iron-Rich Sludge in Synergy with Waste Incineration Fly Ash