Abstract:Chemical recycling of plastic waste via thermochemical processes is essential to move to a carbo-circular economy, reducing our dependence of fossil resources. However, recovering monomers from polyolefins in one or multiple steps is challenging due to their chemical inertness. In the present work, a tandem micro-pyrolyzer coupled to comprehensive two-dimensional gas chromatography and FID/ToF-MS detectors was utilized to study the performance of industrial formulations of steam-treated FCC catalysts and HZSM-5 additives for the in-line catalytic upgrading of polyolefin pyrolysis products towards light olefins and aromatics in two steps. When upgrading pyrolysis vapors from LDPE over the steam-treated catalysts at 600 °C, CH4 yields did not exceed 0.5 wt% due to their low acidity. The FCC catalyst formulations obtained higher yields of C5-C11 aliphatics (up to 42 wt%) and were more active in converting C12 + products than the HZSM-5-containing additives. The highest C2-C4 olefin selectivity of 53 wt% was obtained using a bare steam-treated HZSM-5 additive. With this catalyst, at higher catalyst loading and temperature (700 °C), the light olefin yield reached 69 wt% (19% ethylene, 22% propylene, 10% 1,3-butadiene, and 18% other C4 olefins). Importantly, similar yields of light olefins with even higher propylene yields of 31 wt% were obtained when processing real post-consumer mixed polyolefin waste. An adjusted loading of unsteamed catalyst (to obtain a similar level of initial conversion of C12 + products) showed higher coking propensity and deactivated more rapidly than its steam-treated version. The research results show great potential for the pyrolysis of mixed polyolefin waste followed by the direct in-line upgrading of the pyrolysis vapors to produce high value base chemicals such as C2-C4 olefins, aromatics, and naphtha-range aliphatics at high selectivity while limiting formation of coke, CH4, and H2.

Catalytic aquathermolysis of contaminated polyolefin plastic waste over an in situ iron hydroxide/oxide nanocatalyst derived from an oil-soluble iron precursor

Mechanistic Understanding of Efficient Polyethylene Hydrocracking over Two-Dimensional Platinum-Anchored Tungsten Trioxide.

Catalytic Hydrogenolysis of Plastic to Liquid Hydrocarbons over a Nickel-Based Catalyst

Two-step conversion of waste plastic into light olefins and aromatics on metal-free carbon felt catalyst under radiofrequency heating

Enhanced oil dehalogenation during catalytic pyrolysis of WEEE-derived plastics over Fe- and Ca-modified zeolites

A high-quality hydrogen production strategy from waste plastics through microwave-assisted reactions with heterogeneous bimetallic iron/nickel/cerium catalysts

In-situ exsolution of Fe-Ni alloy catalysts for H2 and carbon nanotube production from microwave plasma-initiated decomposition of plastic wastes

Conversion of Polyethylene to Low-Molecular-Weight Oil Products at Moderate Temperatures Using Nickel/Zeolite Nanocatalysts

Efficient Synthesis of Nickel-Molybdenum/USY-Zeolite Catalyst for Eliminating Impurities (N, S, and Cl) in the Waste Plastic Pyrolysis Oil: Dispersion Effect of Active Sites by Surfactant-Assisted Melt-Infiltration

Maximizing light olefins and aromatics as high value base chemicals via single step catalytic conversion of plastic waste

High-purity H2 Production from Mixed PVC/PET Plastic Wastes Through Tandem Hydrothermal Depolymerization and Aqueous Phase Reforming

Catalytic pyrolysis of film waste over Co/Ni pillared montmorillonites towards H2 production

In situ hydrodeoxygenation of heavy bio-oil using a Ce/Fe-based oxygen carrier in methanol-zero valent aluminum media

Coking-resistant NiO@CeO 2 catalysts derived from Ce-MOF for enhanced hydrogen production from plastics

Complete Hydrogenolysis of Mixed Plastic Wastes

A reusable, impurity-tolerant and noble metal–free catalyst for hydrocracking of waste polyolefins

Experimental study of catalyst performance on hydrothermal gasification of automotive fluff as a complex plastic containing waste

Tandem pyrolysis-catalytic upgrading of plastic waste towards kerosene-range products using Si-pillared vermiculite with transition metal modification

Plasma‐Enabled Process with Single‐Atom Catalysts for Sustainable Plastic Waste Transformation

Microwave-carbon Fiber Cloth Co-Ignited Catalytic Degradation of Waste Plastic into High-Yield Hydrogen and Carbon Nanotubes

Investigation on thermal dechlorination and catalytic pyrolysis in a continuous process for liquid fuel recovery from mixed plastic wastes