Direct Liquefaction of Coal Using Ferric-Sulfide-Based, Mixed-Metal Catalysts Containing Mg or Mo

DC Tian,RK Sharma,AH Stiller,CD Stinespring,DB Dadyburjor

DOI: https://doi.org/10.1016/0016-2361(95)00294-4

IF: 7.4

1996-01-01

Fuel

Abstract:Direct liquefaction of coal was studied using ferric-sulfide-based mixed-metal catalysts containing magnesium or molybdenum as the second metal. The catalysts were mostly impregnated in situ on the coal, although physical mixtures of catalyst and coal were also used in some runs for comparison. The liquefaction was performed at 350–440°C under a hydrogen pressure of 6.9 MPa (cold). Tetralin and phenanthrene were used as solvents. The catalytic effects became more evident with phenanthrene as solvent. The activities of impregnated catalysts were 5–8% higher than those of the physical mixtures of catalyst and coal. The addition of magnesium was found to be not particularly beneficial to the activity and selectivity of the catalyst. The addition of molybdenum increased the catalyst activity by up to 8 wt%, resulting in conversions of >90 wt% at 400°C. The yield of the oil fraction also increased considerably in the presence of molybdenum, especially at 400 and 440°C. The activity of the catalyst decreased by ∼5% when it was exposed to air.