Abstract:In this paper, the experiment of cellulose from corn stalk using 1, 2-propylene glycol (PG) and diethylene glycol (DEG) liquefaction catalyzed by phosphoric acid at atmosphere pressure was carried out. The effect of reaction time on the structural changes of cellulose in the liquefaction process of polyhydric alcohols was investigated, aiming at understanding the mechanism of cellulose liquefaction reaction under the action of acid catalyzed polyhydric alcohols. It was found that the liquefaction yield increased first and then decreased with the extension of reaction time, and reached the highest at 150 min (99.34 %). In the phase of increasing liquefaction yield, cellulose was degraded and translated into glucose, which was then converted into plenty of glycosides with PG/DEG. These glycosides were further converted into low molecular weight (LMW) substances such as hydrocarbons, acids, alcohols, esters, ketones, and ethers. At this time, the biofuel contained 70 %-85 % compounds with carbon number less than 25 and 5 %-10 % compounds with carbon number more than 25. As the prolongation of reaction time (after 150 min), quantities of unstable free radicals formed by cellulose degradation could combine with each other or with hydrogen atoms provided by PG/DEG to produce relatively stable macromolecular substances. That is, the polydispersity (Mw/Mn, abbreviated Ð = 1.28) of the generated biofuel at this stage no longer decreased. However, liquefaction residue produced at 240 min had changed essentially, which was completely different from the liquefaction residue produced in the early stage of liquefaction. In conclusion, this paper revealed the partial reaction process of cellulose by studying the structural changes in the liquefaction process of polyhydric alcohols, which laid a theoretical foundation for exploring the liquefaction mechanism of cellulose.

Phosphoric Acid Catalyzed Liquefaction of Acacia Mangium Bark and Resinification of Liquefied Products

Kinetics of fructose decomposition catalyzed by organic acids in high temperature liquid water

Catalytic Decomposition of Furfural Residue with Dilute Sulfuric Acid to Produce Levulinic Acid in High Temperature Liquid Water

Comparative study of liquefaction process and liquefied products from bamboo using different organic solvents

The Solid Residue and liquid Products of Paulownia Direct Liquefaction Analyzed With FTIR

The mechanism of solid acid-catalyzed bamboo sawdust liquefaction under polyol systems

Analysis of chemical components and liquefaction process of eucalyptus globulus bark

Mild Liquefaction Behavior of Lignocellulosic Material Components

Acid-catalyzed Kraft lignin liquefaction for producing polyols and polyurethane foams

Phenolation to Improve Hardwood Kraft Lignin for Wood Adhesive Application

Investigation of liquefied wood residues based on cellulose, hemicellulose, and lignin

Synthesis and properties of phenol/bisphenol A - liquefied Cryptomeria japonica wood-based epoxy resins and their glueability

Liquefaction of cornstalk in hot-compressed phenol-water medium to phenolic feedstock for the synthesis of phenol-formaldehyde resin

[C4h8so3hmim]hso4 As an Efficient Catalyst for Direct Liquefaction of Bagasse Lignin: Decomposition Properties of the Inner Structural Units

Differences in catalytic liquefaction kinetics of corn stalk fractions

Liquefaction pathway of corn stalk cellulose in the presence of polyhydric alcohols under acid catalysis

Eco Valorization of Eucalyptus globulus Bark and Branches through Liquefaction

Effect of Crystalline Structure of Wood on Liquefaction

Preparation of amphiphilic mesoporous carbon-based solid acid from kraft lignin activated by phosphoric acid and its catalytic performance for hydration of α-pinene

Catalytic hydrothermal liquefaction of alkali lignin at low temperature: Effect of acid and base catalysts on phenolic monomers production

Depolymerization and Activation of Alkali Lignin by Solid Acid-Catalyzed Phenolation for Preparation of Lignin-Based Phenolic Foams