Abstract:Nowadays, surface acoustic wave (SAW) resonators are attracting growing attention, owing to their widespread applications in various engineering fields, such as electronic, telecommunication, automotive, chemical, and biomedical engineering. A thorough assessment of SAW performance is a key task for bridging the gap between commercial SAW devices and practical applications. To contribute to the accomplishment of this crucial task, the present paper reports the findings of a new comparative study that is based on the performance evaluation of different commercial SAW resonators by using scattering (S-) parameter measurements coupled with a Lorentzian fitting and an accurate modelling technique for the straightforward extraction of a lumped-element equivalent-circuit representation. The developed investigation thus provides ease and reliability when choosing the appropriate commercial device, depending on the requirements and constraints of the given sensing application. This paper deals with the performance evaluation of commercial surface acoustic wave (SAW) resonators by means of scattering (S-) parameter measurements and an equivalent-circuit model extracted using a reliable modeling procedure. The studied devices are four TO-39 packaged two-port resonators with different nominal operating frequencies: 418.05, 423.22, 433.92, and 915 MHz. The S-parameter characterization was performed locally around the resonant frequencies of the tested SAW resonators by using an 8753ES Agilent vector network analyzer (VNA) and a home-made calibration kit. The reported measurement-based study has allowed for the development of a comprehensive and detailed comparative analysis of the performance of the investigated SAW devices. The characterization and modelling procedures are fully automated with a user-friendly graphical user interface (GUI) developed in the Python environment, thereby making the experimental analysis faster and more efficient.

High-Accuracy Modeling Method for Transmission Line on Surface Acoustic Wave Substrates

Accurate Evaluation of Transmission Line Model at Higher Frequencies for Characterising Field-to-Wire Coupling of Coated Twisted-Wire Pair with a Grounded Conductor

An Improved Ultrawideband Open-Short De-Embedding Method Applied Up to 220 GHz

An LC Resonant Method for the Accurate Extraction of Small Parasitic Resistance

De-Embedding Method Using an Electromagnetic Simulator for Characterization of Transistors in the Millimeter-Wave Band

Hybrid Full-Wave Analysis of Surface Acoustic Wave Devices for Accuracy and Fast Performance Prediction

Modeling for High-Frequency Spurious Responses in Incredible High-Performance Surface Acoustic Wave Devices

Frequency-dependent equivalent modelling of broadband air-coupled transducers

An Improved 1X De-Embedding Method for Fixtures with Impedance Discontinuities

An Enhanced One-Port Waveguide Method for Sheet Resistance Extraction

Design Method of Multi-Sine Signal for Broadband Impedance Measurement Considering Frequency Coupling Characteristic

An Improved Thru-Line De-Embedding Technique up to 80 GHz

A New Calibration Technique of Electromagnetic Simulators for Accurate Analyses of Microwave Components on Epitaxial Wafers

On the Performance Evaluation of Commercial SAW Resonators by Means of a Direct and Reliable Equivalent-Circuit Extraction

Design of On-Wafer Calibration Kit for Accurate Pyramid Probe Card-Based Surface Acoustic Wave Filter Measurements

A Deembedding Method for the S-Parameter Extraction of Surface-Mounted Devices with Asymmetric Fixtures

Modeling And Measurement Of A Common-Mode Filter Based On The 3-D Transmission Line Structure

Method for Accurately Measuring the Power-Frequency Parameters of Ehv/Uhv Transmission Lines

An Effective Method to Extract Properties of Slow-Wave Structures for TWT Applications

Capacitively Loaded Inverted CPWs for Distributed TRL-Based De-Embedding at (Sub) mm-Waves

Asymmetrical De-Embedding Method for Millimeter-Wave On-Wafer Measurement