Abstract:A series of hydrocracking catalysts based on mesoporous molecular sieves of MCM-41 and SBA-15 with different silica to alumina ratios was prepared. Nickel and molybdenum were used as active metals to impregnate the extrudates prepared by using molecular sieves. The catalysts were characterized for physical and chemical properties and evaluated for the hydrocraking of desulfurised vacuum gas oil. The conversion of DS-VGO was lower as compared to that of the catalyst based on USY zeolite. However, the gas yield was lower in case of mesoporous materials based catalysts. Introduction Zeolites are widely used as catalysts in petroleum refining and for the production of petrochemicals and fine chemicals. Recently, the breakthrough discovery of the M41S family mesoporous materials [1,2] exemplified by the MCM-41 bearing hexagonal-close-packed channels. Despite the excellent structural properties, the hydrothermal stability of MCM-41 and MCM-41-like mesoporous materials was reported as lower than their counter part zeolites. Recently, a new kind of mesoporous silica, SBA-15, has been synthesized with poly (alkylene oxide) triblock copolymers such as poly (ethylene oxide)-poly (propylene oxide)poly (ethylene oxide) (PEO-PPO-PEO) [3]. Beside its uniform and large pore size channels (4.6-30 nm), SBA-15 possesses thick walls (3.1-6.4 nm). Therefore, it has much higher hydrothermal stability than MCM-41 [3]. Owing to their extremely large surface area (generally exceeding 1000 mg) and ultra large pore size these mesoporous materials have attracted great practical and academic interest as acid-catalyzed reactions of large molecules such as hydroprocessing of residual oil [4-5]. In this study, the preparation of MCM-41 and SBA-15 with Si/Al 10, 20 and hydrocracking catalysts based on these mesoporous materials along with USY zeolite are presented. Commercial USY zeolite used in this study also has mesopores in it. Nickel and molybdenum are impregnated as active metals. Mesoporous materials and hydrocracking catalysts prepared were characterized by XRD, surface are, pore volume, pore-size distribution, particle size measurement, and acidity measurement by FTIR and ammonia TPD. The side crushing strength of the extrudates with alumina binder was also measured by crushing strength tester. The catalysts were evaluated for hydrocracking of desulfurized vacuum gas oil (DS-VGO). The hydrocracking activity was measured by GC-SIMDIST method and sulfur and nitrogen contents of the product were measured by elemental analyzer.

Synthesis of Mesoporous Zeolites and Their Application for Catalytic Conversion of Polycyclic Aromatic Hydrocarbons

Synthesis and Catalytic Performances of Mesoporous Aluminosilicates of Cubic and Hexagonal Structure with Stronger Acid Sites

Catalytic Properties of Al-MCM-41 Mesoporous Molecular Sieves for Isomerization of Polycyclic Hydrocarbons

Mesoporous Aluminosilicate Catalysts for the Selective Isomerization of n-Hexane: The Roles of Surface Acidity and Platinum Metal.

[Synthesis and catalytic-isomerization performance of Al-MCM-41 mesoporous sieves]

Generalized and High Temperature Synthesis of a Series of Crystalline Mesoporous Metal Oxides Based Nanocomposites with Enhanced Catalytic Activities for Benzene Combustion

Synthesis of Spherical-Like Pt-MCM-41 Meso-Materials with High Catalytic Performance for Hydrogenation of Nitrobenzene.

Synthesis of Al-Containing Mesoporous Molecular Sieves and Their Catalytic Performance to Isomerization Reaction of Endo-Tetrahydrodicyclo-Pentadiene

Catalytic activities and properties of AlHMS mesoporous molecular sieves

Synthesis of mesoporous molecular sieves and their application as supports for catalysts in F-T synthesis

Synthesis, Characterization, and Catalytic Properties of Stable Mesoporous Aluminosilicates Assembled from Preformed Zeolite L Precursors

Synthesis and Catalytic Evaluation of Mesoporous Molecular Sieve Supported Hydrocracking Catalysts

Synthesis of Hierarchical Micro-mesoporous ZSM-5 Zeolite and its Catalytic Activity in Benzylation of Mesitylene

Synthesis and characterization of mesoporous silica supported metallosalphen-azobenzene complexes: efficient photochromic heterogeneous catalysts for the oxidation of cyclohexane to produce KA oil

Synthesis And Catalytic Performance Of Hmcm-49/Mcm-41 Composite Molecular Sieve For Alkylation Of Phenol With Isopropanolz

High Activity in Catalytic Cracking over Stable Mesoporous Aluminosilicates

Preparation and Alkylation Performance of HMCM-41 Mesoporous Molecular Sieve

Role of Pore Size and Surface Properties of Ti-MCM-41 Catalysts in the Hydroxylation of Aromatics in the Liquid Phase

Mesoporous Materials from Zeolite Seeds As Supports for Nickel–tungsten Sulfide Active Phasespart 2. Catalytic Properties for Deep Hydrodesulfurization Reactions

Catalytic Cracking of n-Dodecane to Chemicals: Effect of Variable-Morphological ZSM-5 Zeolites Synthesized Using Various Silica Sources

Synthesis of hollow mesoporous aluminosilicate spheres and its catalytic cracking properties