Abstract:Efficient purification of oil-in-water emulsions is significant for protecting global water resources. Nevertheless, the traditional passive technologies for handling oil-in-water emulsions suffer from the drawback of low cost-effectiveness due to the use of robust filtration membranes. In our previous research, an active electrokinetic-based oil droplet filtration technique was developed that relied on the negative dielectrophoretic phenomenon induced by the huge difference between the dielectric properties of oil and water. However, the effects of the temperature and pH of wastewater on the electrokinetic filtration efficiency of oil droplets have never been clarified. In the present work, a multi-physical theoretical model of electrokinetic purification of oil-in-water emulsions with modulation of temperature and pH is constructed. The dimensionless ratio of dielectrophoretic force over hydrodynamic (HD) force on an oil droplet is an essential criterion for its dynamic behavior, and it exhibits a positive correlation with purification effectiveness of oil-in-water emulsions. From numerical modeling, the magnitude of the dielectrophoretic force to HD force ratio on an oil droplet is enhanced by decreasing temperature, increasing ion concentration and a neutral pH (pH = 7.0) of oily wastewater. Then, the critical direct current voltage for realizing successful oil droplet filtration through an insulated nanopore under electrokinetics is analyzed under different parameters, with the results indicating that the amount of energy required for purification of oil-in-water emulsions can be reduced by reducing the temperature and neutralizing the pH of the aqueous solution. This work offers a theoretical understanding of electrokinetic purification of oil-in-water emulsions, contributing to its development for industrial applications.

Theory and Experimental Study on Purifying Emulsion Using Electromagnetic Technique

Separation of Oil–water Emulsion by Disc Ceramic Membrane under Dynamic Membrane Filtration Mode

Application of Electromagnetic (EM) Separation Technology to Metal Refining Processes: A Review

The Purification Experiments of Cold Rolling Emulsion by Hydrocyclone

Performance of Electromagnetic Purification System in Continuous Twin Roll Casting of Aluminum Sheet

Pretreatment of emulsion wastewater discharged from cold rolling mill by demulsification method

Nanopore-based Electrokinetic Purification of Oil-in-water Emulsions with Temperature and Ph Modulation

INFLUENCE OF EMULSION OIL ON THE SURFACE CLEANNESS OF COLD ROLLED STEEL SHEET

The Study on Compound Instrument of Oil Emulsion Concentration

Effects of Electromagnetic Purification on Properties of Al-Re-Rod for Electrical Purpose

Application and Development of Emulsion Lubricant Used for Aluminum Strip Hot Rolling

The dynamics study of microwave demulsification of heavy crude oil emulsion

The Application of Electromagnetic Processing Technology in Materials Preparation

The Droplet Evolution Trend and Purification Efficiency in ESR Process by Superimposing a Static Magnetic Field

Effect of electric field intensity on electrophoretic migration and deformation of oil droplets in O/W emulsion under DC electric field: A molecular dynamics study

Online Electromagnetic Filtration of Molten Aluminum Using A Multistage Separator System

Study on the Formulation of Emulsion Oil for Cold Rolling Copper Sheet and Evaluation of Its Lubrication Performance

Application of Compound Instrument of Oil Emulsion Concentration

Electric Demulsification Membrane Technology for Confined Separation of Oil-Water Emulsions

Effect of Electromagnetic Water Treatment on Water Environment and Metal Equipment

W/O emulsion separation in combined electrostatic and centrifugal fields