Abstract:Abstract A real industrial electroplating rinsing wastewater was collected and subjected to physical and chemical examination. The study showed that it can be categorized as high strength wastewater, at pH- 2, COD 1430 mg/l, and high level of metals above permissible limits, namely: 150, 30, 25, and 2.9 for Ni, Cu, Zn, and Fe mg/l respectively. Therefore, metals must be adequately removed before discharging to avoid any hazardous impact on the environment. Similar synthetic wastewater was prepared to study the effect of chemical coagulation for the precipitation of metals. The optimum removal rate was achieved by using a combination of lime and ferric chloride at 100 and 30 mg/l respectively. The chemically treated electroplating wastewater was subjected to an electrocoagulation study. A comparison between iron and stainless-steel electrodes for the removal of metals was investigated. Furthermore, the effect of different electric voltages, and contact time on metals removal efficiency were also examined. It was found that the optimum removal capacity was achieved when a stainless steel electrode was employed in the presence of ferric chloride as coagulant, at 10 volts, 30 min. contact time, and pH 9 for synthetic solution. In a batch treatment system, the real industrial wastewater was treated at the predetermined optimum operating conditions; the removal of metals was 92.1%, 87.8% and 82.9% for Ni. Zn, and Cu respectively. By employing a continuous flow reactor for the treatment of the same real wastewater and under the same operating conditions, metals removal rate increased to 98.9%, 97.4% and 96.6% for Ni. Zn, and Cu respectively. The level of metals in the final treated wastewater copes with Egyptian Environmental Regulation. The overall results confirmed that the electro-coagulation (EC) technology offers an effective alternative process in combination with the conventional chemical coagulation process for reaching high removal performance of toxic metals from the electroplating wastewater. The advantage of EC technique is achieving high treatment efficiency instead of expensive chemical reagents, high construction cost and/or other conventional processes. In addition, the final treated water can be reused for rinsing process in the electroplating industry and/or discharging without any environmental hazard effect. It is also recommended to employ solar energy instead of electricity to reduce cost of operation.

Experimental and static simulation study for enhancing wastewater treatment by electrocoagulation using magnetic fields

The impact of a magnetic field on electrode fouling during electrocoagulation

Integrating of electrocoagulation process with submerged membrane bioreactor for wastewater treatment under low voltage gradients

Removal of nutrients and other emerging inorganic contaminants from water and wastewater by electrocoagulation process

Electromagnetic Synergistic Treatment of High Salt and High Organic Wastewater

Enhancement of organics and nutrient removal and microbial mechanism in vertical flow constructed wetland under a static magnetic field

Development of electrocoagulation process for wastewater treatment: optimization by response surface methodology

Implications of advanced wastewater treatment: Electrocoagulation and electroflocculation of effluent discharged from a wastewater treatment plant

Intensification of a new electrocoagulation system characterized by minimum energy consumption and maximum removal efficiency of heavy metals from simulated wastewater

Treatment of industrial electroplating wastewater for metals removal via electrocoagulation continous flow reactors

ENHANCING SUSPENDED SOLIDS REMOVAL FROM WASTEWATER USING Fe ELECTRODES

Hospital wastewater treatment using electrocoagulation: Performance, kinetics, settlement analysis, and cost-effectiveness

Studying the effect of reactor design on the electrocoagulation treatment performance of oily wastewater

Enhancement of anti-fouling and contaminant removal in an electro-membrane bioreactor: Significance of electrocoagulation and electric field

Pollutant Removal Efficiency of Electrocoagulation Method from Industrial Wastewater: Comparison with Other Treatment Methods and Key Operational Parameters—a Comparative Study Review

Effect of static magnetic field on electricity production and wastewater treatment in microbial fuel cells

Electrocoagulation removal of Pb, Cd, and Cu ions from wastewater using a new configuration of electrodes

Investigation on operating parameters and cost using an electrocoagulation process for wastewater treatment

Domestic greywater treatment using electrocoagulation-electrooxidation process: optimisation and experimental approaches

Electrocoagulation-based wastewater treatment process and significance of anode materials for the overall improvement of the process: A critical review

Techno-economic evaluation of electrocoagulation for cattle slaughterhouse wastewater treatment using aluminum electrodes in batch and continuous experiment