Abstract:The established linear fatigue life prediction model based on the Miner rule has been widely applied to fatigue life prediction under constant amplitude uniaxial and multiaxial loading. Considering the physical significance of crack formation and propagation, a multiaxial equivalent linear fatigue life prediction model is put forward based on Miner rule and critical plane method under constant amplitude loading. The essence of this approach is that the equivalent strain, which consists of the shear strain and normal strain on the critical plane, replaces the relevant parameter of uniaxial nonlinear fatigue damage model. The principal axes of stress/strain rotate under non-proportional loading. Meanwhile, the microstructure of material and slip systems change, which lead to additional hardening effect. The ratio of cyclic yield stress to static yield stress is used to represent the cyclic hardening capacity of material, and the influence of phase difference and loading condition on the non-proportional hardening effect is considered. The multiaxial fatigue life is predicted using equivalent stain approach, maximum shear stain amplitude model, CXH model, and equivalent multiaxial liner model under proportional and/or non-proportional loading. The smooth and notched fatigue specimens of four kinds of materials (Q235B steel, titanium alloy TC4, Haynes 188, and Mod.9Cr-1Mo steel) are used in the multiaxial fatigue experiments to verify the proposed model. The predicted results of these materials are compared with the test results, and the results show that these four models can achieve good effect under proportional loading, but the proposed model performs better than the other three models under non-proportional loading. Meanwhile, it also verifies that the proposed enhancement factor can reflect the influence of phase difference and material properties on additional hardening.

Fatigue Life Prediction of Vulcanized Natural Rubber under Proportional and Non‐proportional Loading

Method Of Fatigue-Life Prediction For An Asphalt Mixture Based On The Plateau Value Of Permanent Deformation Ratio

A unified probabilistic fatigue life prediction model for natural rubber components considering strain ratio effect

RESEARCH ADVANCES IN MULTIAXIAL FATIGUE OF RUBBER

Probabilistic fatigue life prediction model of natural rubber components based on the expanded sample data

Prediction of Rubber Fatigue Life Using an Assimilation‐based Learning Approach and Incremental Crack Propagation Model

A method to obtain probabilistic fatigue lives under varying strain peaks for rubber components with small samples

Life prediction of cord/rubber laminates under multiaxial fatigue

Improving Fatigue Life Prediction of Natural Rubber Using a Physics‐Informed Neural Network Model

A Refined Cumulative Fatigue Damage Model for Rubber Components

Development of Fatigue Life Model for Rubber Materials Based on Fracture Mechanics

Multiaxial Fatigue Life Prediction Based on Nonlinear Continuum Damage Mechanics and Critical Plane Method

A novel fatigue-oxidation-creep life prediction method under non-proportional loading

A life prediction model for rolling contact fatigue based on the improved moment of load path method

A New Empirical Life Prediction Model For 9-12%Cr Steels Under Low Cycle Fatigue And Creep Fatigue Interaction Loadings

Fatigue Crack Initiation Life Prediction of the Rubber Damper Based on Seq-N Curve of Rubber Material

High-cycle and low-cycle fatigue life prediction under random multiaxial loadings without cycle counting

Prediction and evaluation of fatigue life for mechanical components considering anelasticity‐based load spectrum

A new multiaxial fatigue life prediction model considering additional hardening effect

A Novel Planar Tension Test of Rubber for Evaluating the Prediction Ability of the Modified Eight-Chain Model under Moderate Finite Deformation

Multiaxial fatigue life prediction for metals by means of an improved strain energy density-based critical plane criterion