Abstract:Abstract: Cord-rubber composites such as timing belts are subjected to coupled tension and bending under typical service conditions. Due to its increased modulus, carbon cords are replacing the traditional glass cords as the reinforcing materials in timing belt products. The bending fatigue behaviour of carbon cord reinforced hydrogenated butadiene rubber (CC-HNBR) composites is of increasing interest for both understanding their failure mechanism and supporting new industrial product development. In this work, a simple experimental set-up that replicated in a simplified way the real-pulley situation encountered in a timing belt operation was developed, in order to investigate the effects of the applied tension, bending curvature, frequency and R ratio on the bending fatigue life of carbon cord reinforced hydrogenated nitrile butadiene rubber (CC-HNBR) composites. Furthermore, numerical investigation of the stress distribution within the CC-HNBR composite, under both uniaxial tension and coupled tension and bending loading, were carried out using finite element analysis (FEA). Cord-dominated fracture was observed close to the point where the specimen just left the pulley using a thermal imaging camera at high stress levels. This location is due to the combined effects of bending and maximum tension at this site. There was a reduction in the bending fatigue life as a result of a higher level of bending strain introduced by a smaller diameter pulley. Frequency had negligible effects on the bending fatigue life within testing regimes probably resulting from the rubber only generating limited heat build-up even at the highest test frequencies. Higher R ratios led to a longer bending fatigue life potentially because of strain induced crystallisation of the HNBR matrix at the tip of any cracks that are generated. This study provides a basic investigation into the bending fatigue behaviour of CC-HNBR composites under coupled tension and bending loading conditions, shedding some light on failure characteristics of CC-HNBR composites under interaction of bending and tension deformations.

Life prediction of cord/rubber laminates under multiaxial fatigue

Prediction of Rubber Fatigue Life Using an Assimilation‐based Learning Approach and Incremental Crack Propagation Model

Method Of Fatigue-Life Prediction For An Asphalt Mixture Based On The Plateau Value Of Permanent Deformation Ratio

Fatigue Crack Initiation Life Prediction of the Rubber Damper Based on Seq-N Curve of Rubber Material

Evaluation of multiaxial fatigue life prediction approach for adhesively bonded hollow cylinder butt-joints

Fatigue Behavior of Cord-Rubber Composite Materials under Different Loading Conditions

Prediction of long-term fatigue life of CFRP composite hydrogen storage vessel based on micromechanics of failure

RESEARCH ADVANCES IN MULTIAXIAL FATIGUE OF RUBBER

A unified probabilistic fatigue life prediction model for natural rubber components considering strain ratio effect

A Refined Cumulative Fatigue Damage Model for Rubber Components

A life prediction model for rolling contact fatigue based on the improved moment of load path method

A new data-driven probabilistic fatigue life prediction framework informed by experiments and multiscale simulation

Development of Fatigue Life Model for Rubber Materials Based on Fracture Mechanics

Multi-Stage Hybrid Loading Fatigue Life Prediction Study

Fatigue life prediction of composite suspension considering residual stress and crack propagation

A method to obtain probabilistic fatigue lives under varying strain peaks for rubber components with small samples

High-cycle and low-cycle fatigue life prediction under random multiaxial loadings without cycle counting

An experimental-cohesive zone model approach to predict fatigue life of adhesive joints with varying modes of loading and joint configurations for automotive applications

Quasi-static bending fatigue of carbon cord-rubber composites used in timing belts

Improving Fatigue Life Prediction of Natural Rubber Using a Physics‐Informed Neural Network Model

Multiaxial Fatigue Life Prediction Based on Nonlinear Continuum Damage Mechanics and Critical Plane Method